MBA02040C3162FCT00

Series:	MBA/SMA 0204 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	31.6 kOhms
Tolerance:	±1%
Power (Watts):	0.4W
Composition:	Thin Film
Features:	Automotive AEC-Q200
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.063" Dia x 0.142" L (1.60mm x 3.60mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What is the MBA02040C3162FCT00?

The MBA02040C3162FCT00, also known as a through hole resistor, is a component used in various electronic circuits. It is a type of resistor which has two leads or connections that are soldered into the holes of a printed circuit board (PCB). The resistor is then typically mounted on a DIP (dual in-line package) type of package and connected by a pin header system.

Application Field and Working Principle

The MBA02040C3162FCT00 has a wide variety of applications, including motor control, power supplies, signal conditioning, audio and other types of electronics. In most applications, the resistor is used to control the amount of current flowing through the circuit, while providing resistance to voltage changes. The working principle of the MBA02040C3162FCT00 is quite simple. The resistor acts like a bridge between two points in a circuit, providing resistance to the flow of electrons. The value of the resistor determines the amount of current and voltage flowing through it. In most cases, the resistor is used to limit the amount of current and voltage, to prevent electrical damage or excess power consumption. The resistor can also be used in combination with other components to create a voltage divider circuit. This type of circuit is used to reduce the voltage level of a signal while maintaining a consistent signal strength. This type of circuit is often used in radio receivers and transmitters. There are several different types of through hole resistors, such as those made of carbon film, metal oxide film, and wire wound. Each type of resistor has its own unique characteristics and can be used in different applications. In general, wire wound resistors are most suitable for high power applications while metal oxide resistors are best used for low current applications such as signal conditioning.

Conclusion

The MBA02040C3162FCT00 is a type of through hole resistor that is commonly used in many different applications. It is a simple component that provides resistance to the flow of current and voltage. It can be used as a voltage or current limiter, or in combination with other components to create a voltage divider circuit. There are several types of through hole resistors available, and each has its own unique characteristics and applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description