MBA02040C3609DC100

Series:	MBA/SMA 0204 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	36 Ohms
Tolerance:	±0.5%
Power (Watts):	0.4W
Composition:	Thin Film
Features:	Automotive AEC-Q200
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.063" Dia x 0.142" L (1.60mm x 3.60mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistors are physical resistors designed to carry out resistance tasks.Such resistors can be found in a wide range of electronic applications. The circumstances surrounding their use are often varied and complex, but the fundamental principles behind them remain the same. The most common Through Hole Resistors are typically constructed to suit the needs of the application. It’s important to understand these requirements before attempting to design or use resistors.The MBA02040C3609DC100 is aThrough Hole Resistor that can be used in many different applications. This particular resistor uses a metal oxide film heat element. This element is usually made from a material with a high vapor pressure and low temperature coefficient, such as tantalum, platinum, or aluminum. The metal oxide film structure has a lower resistance than the element itself and is used as a cover to reduce the loss of power during the operation of the resistor.

Application Field

The MBA02040C3609DC100 has a wide range of applications in electronics. It can be used to regulate voltage and current, provide power to various other components, and create a fixed reference for digital systems.The resistor can be used to regulate voltage and current where AC or DC signals are involved. It can be used to prevent overcharging or short-circuiting and it can be used as a load resistor for an automatic transfer switch.In addition, the MBA02040C3609DC100 can be used to provide power to other components. It can be connected to an amplifier to supply power to a speaker, or it can be used to power up a fluorescent lamp.Last, but not least, the MBA02040C3609DC100 can be used as a reference resistor. This resistor is often used to create a fixed reference voltage for sensitive digital systems. It is also used as a reference resistor for temperature sensors, strain gauges, and other devices.

Working Principle

The working principle of the MBA02040C3609DC100 is essentially the same as any other Through Hole Resistor. The resistor works by resistance, or altering the current flow in order to modify the signal or reduce the voltage of a power supply.The resistor consists of a single wire or foil, which is connected to a substrate. This substrate is usually made from mica, epoxy, or ceramic material. The resistor is then connected to two other terminals, usually one at each end of the resistor body.When current passes through the MBA02040C3609DC100 resistor, it passes between the two terminals and is met with resistance from the wire or foil. This resistance is measured in ohms. The resistance of the resistor is determined by the length and width of the wire or foil, as well as the thickness of the substrate material.

Conclusion

The MBA02040C3609DC100 is a Through Hole Resistor with a wide range of applications in electronics. It is usually made from a metal oxide film heat element and can be used to regulate voltage and current, provide power to other components, and create a fixed reference voltage for digital systems.The working principle of the MBA02040C3609DC100 is essentially the same as any other Through Hole Resistor. The resistance of the resistor is determined by the length and width of the wire or foil, as well as the thickness of the substrate material.Overall, the MBA02040C3609DC100 is a reliable, high-performance resistor with applications in many different electronic systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description