MBA02040C4428FRP00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are used when there is a need for large electrical resistances in electrical circuits. Such resistors are typically mounted on the board by means of one or two metal pins that are pushed through the holes in the board. The most common type of Through Hole Resistor is the MBA02040C4428FRP00. This resistor is a standard single-pin, carbon-film, radial-leaded resistor that is used in a wide variety of circuits. It is available in a wide range of resistance values from 10 ohms to 10 megohms.

The MBA02040C4428FRP00 is used in a variety of applications, including power supplies, amplifiers, signal conditioning circuits, and motor control systems. It is also used to protect circuits from damaging surges, or to avoid overheating of components due to excessive current flow. In many applications, it is used to restrict the amount of current flow to an acceptable level. The resistor can also be used to match the input and output voltages in different circuits.

When it comes to its working principle, the MBA02040C4428FRP00 resistor works on the principle of direct current (DC) resistance. This refers to a resistor which limits the flow of current through it depending on the value of resistance. The resistor is basically a conductive material such as carbon or metal, which has an electrical resistance. The resistance of the resistor is determined by the size, shape, material, and number of turns of the resistor.

The resistor is usually constructed as a small metal cylinder. The ends are typically covered with a special insulating material such as wax, polyimide, glass, or ceramic. The middle part of the resistor is usually made up of metal wire with a specific length and diameter. The length and diameter influence the resistance value, as the most common values are 10 ohms to 10 megohms.

When the two ends of the resistor are connected across a voltage, the current flowing through it is proportional to the voltage applied across it. This is due to the fact that the resistance limits the flow of current in the circuit. The current flow is also determined by the material and the size of the resistor. The current flowing through the resistor can be measured using an ammeter or a voltmeter.

When it comes to its application field, the MBA02040C4428FRP00 resistor can be used in various types of circuits and systems. It is commonly used in audio and video equipment, control systems, automotive systems, power supplies, and these kind of applications. It can also be used with various types of transistors and other components to control the amount of current flowing through them, or to limit the voltage or current transfer.

So, in conclusion, the MBA02040C4428FRP00 Through Hole Resistor is a standard single-pin, carbon-film, radial-leaded resistor that is used in various applications. It is commonly used to protect circuits from damaging surges, or to avoid overheating of components due to excessive current flow. It works on the principle of direct current (DC) resistance, and it can be used in various types of circuits and systems.

The specific data is subject to PDF, and the above content is for reference