MBA02040D1872BC100

Series:	MBA/SMA 0204 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	18.7 kOhms
Tolerance:	±0.1%
Power (Watts):	0.4W
Composition:	Thin Film
Features:	Automotive AEC-Q200
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.063" Dia x 0.142" L (1.60mm x 3.60mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

MBA02040D1872BC100 is an axial through-hole resistor, designed for use in engineering and circuit experimentation involving either high-voltage or high-power applications. The resistor is housed in a cylindrical metalized case, which features high chemical stability, electrical resistance and is thus robust for any type of application. The resistor is rated for maximum power up to 0.08 W at 25 °C and a maximum voltage of 200 V, and its resistance range is from 1K ohm to 100K ohm with an accuracy of ±1%. The resistor is particularly suitable for applications where high reliability and low distortion are needed, such as high-impedance applications and where extreme accuracy in the conditioning of a signal is needed.

The working principle of the resistor involves the conversion of electrical energy into heat. This is done using a resistive element, which is based on different materials such as metal wires, carbon or metal-oxide films. When the electrode is connected to the circuit, current is induced in the form of electrons and amps. As the current passes through the material it is resisted, and the energy it possesses is converted into heat. This process is known as resistive heating, or Joule heating, and is a form of Ohm’s law. The energy dissipated is determined by the resistor’s resistance and the current passing through it.

MBA02040D1872BC100 is mainly used for measuring voltage, current, no-load current, short-circuit, and overload protection for low-voltage high-current DC circuits. It is also used in a variety of industrial applications such as power supplies and process control. In addition, it can be used in order to protect electrical instruments from thermal damage due to overload, and as an electrical surge protector. The resistor is also suitable for high temperature, high voltage, and high-frequency environments, providing reliable performance and extended service life.

MBA02040D1872BC100 is an ideal choice for various engineering and circuit experimentation projects, including those that involve high-voltage or high-power requirements. It is suitable for a wide range of temperature and voltage applications, and is designed to provide reliable protection for electrical instruments against overload and short-circuit conditions. It is also able to resist high levels of heat and voltage, allowing for extended use in high-frequency applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description