MBA0204AC1500FC100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of electronic component used to provide a steady current through an electrical circuit. The MBA0204AC1500FC100 is an example of a through hole resistor, which is typically identified through three-digit numerical codes. The first two digits of the code refer to the size of the resistor, while the third digit indicates the amount of resistance. In this example, the resistor has a size of 20mm x 4.4mm and a resistance of 1500 ohms.

The MBA0204AC1500FC100 includes two small terminals, known as leads, that go through the casing of the resistor. These leads are typically made of chrome-plated brass and are designed to be placed into a pre-drilled hole on the board. The leads are held in place by a small metal plate or a solder joint. The resistor is usually covered in a radiation-proof non-flammable plastic casing.

The working principle of through hole resistors, such as the MBA0204AC1500FC100, is relatively simple. Initially, the electrical current attempts to flow directly through the resistor. As it passes through the resistor, the electrons that make up the current collide with the material inside the resistor. This collision subsequently creates a voltage drop and an opposing force, which helps to reduce the current flow to the desired level and thus throttle the voltage.

The MBA0204AC1500FC100 is suitable for a variety of applications, such as in power supplies, circuit breakers, motor controllers, and audio equipment. In power supplies, it is often used to reduce the current to acceptable levels, as well as limit any overvoltage from occurring. In circuit breakers, it is used to limit the amount of current flowing through the circuit, while in motor controllers, it is used to help control the speed and torque output of the motor. Additionally, the MBA0204AC1500FC100 can also be used in audio equipment to reduce frequencies and filter noise from the signal.

Overall, through hole resistors are a vital component for a wide range of electronic applications. The MBA0204AC1500FC100 is a particularly versatile product, with its resistance of 1500 ohms making it suitable for both low- and high-voltage applications. On top of that, its small size and non-flammable casing make it ideal for use in small devices. With its easy-to-use leads and well-controlled current, the MBA0204AC1500FC100 is an invaluable addition to any project.

The specific data is subject to PDF, and the above content is for reference