MBB02070C1219FRP00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A through hole resistor is an electrical component consisting of a ceramic body and metal ends. The ceramic body contains a conductive material (lead or tin) that acts as a bridge between the two metal ends. The metal ends are connected together and connected to an external circuit. MBB02070C1219FRP00 is an example of a through-hole resistor that can be used in various applications, such as signal processing, switching, and power control.

The MBB02070C1219FRP00 is a small, light-weight, leaded resistor with a power rating of 0.125 watts and a resistance value of 47 ohms. It is designed for use in high frequency switching circuits and is constructed using a special ceramic body and metal end contacts. It is available in standard lead and tinned finishes and can be mounted through a standard through-hole or surface-mount board.

The MBB02070C1219FRP00 through hole resistor is used in a variety of applications due to its small size and light weight. Its main applications include motor control, robotics, and power switching circuits. It is also used in signal processing circuits to provide feedback and stabilization in timing and synchronization systems.

The working principle of MBB02070C1219FRP00 through hole resistor is based on the principles of Ohm’s law. The current passing through the resistor is determined by its resistance and the voltage applied across it. When the applied voltage is raised or lowered, the resistor\'s resistance changes, resulting in a change in the amount of current flowing through.

The MBB02070C1219FRP00 through hole resistor can also be used as a voltage divider, allowing for the measurement of the difference between two voltages. It is commonly used in power control and regulation systems to measure the load current and voltage. It can also be used in DC motor control systems to limit the current flow and protect the motor from overvoltage.

The MBB02070C1219FRP00 is available as both a standard through hole and a surface-mount package. These packages are typically made of ceramic components and a metal end contact that is connected to the circuit. The through-hole package has two tabs with holes, while the surface-mount package has two metal plates at the bottom. Both packages are available in standard lead and tinned finishes, allowing them to be easily mounted on the board.

The MBB02070C1219FRP00 through hole resistor is a versatile component that is widely used in various systems for its small size, light weight, and ease of use. Its working principle is based on Ohm’s law, allowing for the measurement of the difference between two voltages, the control of current flow, and the protection of motors from overvoltage. It is available in both through hole and surface-mount packages, making it suitable for a variety of application fields.

The specific data is subject to PDF, and the above content is for reference