MBB02070C1370FRP00

Series:	MBB/SMA 0207 - Professional
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	137 Ohms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Thin Film
Features:	Automotive AEC-Q200
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Introduction to Through Hole Resistors:

Through hole resistors are passive components used to control the amount of current passing through an electrical circuit. They are connected by two metal rods – a short one going into a round or square hole in the circuit board and a long one coming up from the other side. The resistor is connected to the circuit by connecting the two metal rods together.Through hole resistors are primarily used for voltage division, current division, and biasing, and in filters and tie-downs, depending on the application. They can also be used to protect components from excessive current. Different types of through hole resistors are available, including metal film, carbon film, and carbon composition resistors. They come in a variety of sizes and shapes and are usually made of a ceramic material. The type of resistor depends on the application. For example, metal film resistors are generally used for high precision and low power applications, while carbon film resistors are used for higher power applications.

MBB02070C1370FRP00 Application Field and Working Principle

The MBB02070C1370FRP00 is a through hole resistor made of metal film that is primarily used for precision applications, such as amplifiers, analog to digital converters, as well as digital to analog converters. The resistor is 0.75mm wide and 8mm long with a tolerance of 1%. It has a resistance range of 0.2 to 7K ohms and a power rating of 0.25W (250mW). The working principle of this type of resistor is based on the fact that electric current flows through a resistor in proportion to the voltage across it. As the voltage increases, the current increases, and as the voltage decreases, the current decreases. Resistance is the measure of how much the current is restricted by the resistor. The MBB02070C1370FRP00 has a resistance value of 0.2 to 7K ohms, so the current will be affected depending on the voltage applied to the resistor.The voltage drop across the resistor is also an important factor in its functioning as it determines the amount of power consumed by the resistor. The lower the voltage drop, the less power is consumed, while the higher the voltage drop, the more power is consumed. The MBB02070C1370FRP00 has a power rating of 0.25W, so it can be used for relatively low power applications.

Conclusion

Through hole resistors are used in many different types of applications, from precision applications such as amplifiers and converters to high power applications. The MBB02070C1370FRP00 is a through hole resistor made of metal film that is mainly used for precision applications. Its resistance range is 0.2 to 7K ohms and it has a power rating of 0.25W. The working principle of this type of resistor is based on the relationship between voltage and current – as voltage increases, the current increases, and vice versa. The voltage drop across the resistor is also important as it determines the amount of power consumed by the resistor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description