MBB02070C1919FRP00

Series:	MBB/SMA 0207 - Professional
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	19.1 Ohms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Thin Film
Features:	Automotive AEC-Q200
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of Through Hole Resistors

Through hole resistors, or also known as leaded resistors, are a type of resistor that come in a variety of shapes and sizes, providing different degrees of resistance to a current. They are manufactured by attaching two leads to the body, with the resistance calculated as the distance between the leads divided by the cross sectional area of the component. This type of resistor is particularly useful in through-hole mounting, as the two leads make it easy to attach to printed circuit boards (PCBs) and can be easily replaced if damaged or found to be defective.

Types of Through Hole Resistors

There are two main types of through-hole resistors commonly used in electronics, Axial Lead Resistors and Radial Lead Resistors, both of which are popular for use in PCBs, due to their ease of use and ability to be quickly attached to the printed circuit board.

Axial Lead Resistors

Axial lead resistors are cylindrical components with two wires or leads protruding from either end. The leads are spaced in such a way that they can be easily inserted into holes in a PCB, and then soldered to hold them in place.

Radial Lead Resistors

Radial lead resistors are also made of a metal cylinder, and have two leads that are wound around the body of the resistor, in a radial pattern. The leads are then bent and inserted into the PCB to be soldered, and the resistor can then be replaced when necessary.

MBB02070C1919FRP00 – Application and Working Principle

The MBB02070C1919FRP00 is a Through Hole Resistor that comes in a radial lead form factor. This particular component is a resistor made of metal oxide film, which can be used for both high-frequency purposes and general circuit routing.The main application of the MBB02070C1919FRP00 is in through-hole mounting, as the two leads make it easy to nestle into a PCB, and the device is easy to replace when necessary.The working principle of the MBB02070C1919FRP00 is quite simple. It works by providing a resistance to the current flowing through it, based on the amount of film that exists between the two leads. As the current passes through the resistor, it must by necessity pass through the film, and therefore a certain amount of resistance exists.The higher the resistance of the resistor, the more current must pass through it in order to complete the circuit. This makes it useful for controlling the flow of current in a wide range of electronic components, such as motors and light bulbs.

Conclusion

Through hole resistors have become increasingly invaluable in modern electronics and offer a wide range of possible applications and configurations. The MBB02070C1919FRP00 Through Hole Resistor is one of many different components available on the market, providing a high-frequency, easy-to-mount solution that can be quickly and efficiently added to a variety of different projects. With its two lead configuration, it is particularly well suited to through-hole mounting, allowing it to be quickly and easily replaced when needed.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description