MBB02070C2008FC100

Series:	MBB/SMA 0207 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	2 Ohms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Thin Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors refer to resistor components that are typically insulated, and have holes for soldering directly onto a circuit board. The MBB02070C2008FC100 Through Hole Resistor is a popular component in the consumer electronics market due to its high quality and low cost.This resistor type is commonly used in a range of appliances, including TV\'s, computers, games consoles, mobile phones and microwaves. The MBB02070C2008FC100 resistor is specifically designed for applications that require a high level of power handling, particularly in high electrical noise conditions. This makes it the ideal choice for products that require excellent performance in electrical noise conditions.The MBB02070C2008FC100 Through Hole Resistor is a power rated type and therefore can operate under high temperature and voltage conditions. This type of resistor is designed for electrical networks with an intermittent power supply and is able to resist temperatures up to 1000°C. It is also static-resistant, making it a valuable component in a variety of electrical systems.The working principle of the MBB02070C2008FC100 resistor is based on Ohm\'s law, which states that electrical current is always equal to the total of the applied voltage and the resistance of the material. The resistor will then determine the voltage and current levels in the electrical circuit.The MBB02070C2008FC100 resistor is constructed from a variety of components, including a metal base and an insulating material. The metal base provides support and a surface for the resistor to attach to. The insulator, usually made of ceramic or porcelain, provides protection from high temperatures and prevents breaks in the circuit.The resistor is attached to the circuit board by soldering, which creates an electrical connection between the two. This allows the resistor to control the current level in the electrical circuit. The resistor can then be adjusted to achieve the desired electrical parameters.The MBB02070C2008FC100 resistor is designed to deliver highest performance and reliability when used in high electrical noise environments. It has also been shown to be a cost effective solution when compared to other components of similar quality. The combination of features make it an ideal choice for consumer electronics applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description