MBB02070C2322FCT00

Series:	MBB/SMA 0207 - Professional
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	23.2 kOhms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Thin Film
Features:	Automotive AEC-Q200
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of MBB02070C2322FCT00

MBB02070C2322FCT00 is an Through Hole resistor, specifically designed to provide a combination of performance excellence and compact size. MBB02070C2322FCT00, broadly covers applications in different fields, where temperature stability and signal convenience are critical.As one of the most widespread component used in any electronic circuit, through hole resistors are designed to be used in applications that require high current capability, low resistance, and minimal noise or interference. It helps to reduce the possibility of unwanted signals in a system and improve the signal to noise ratio within a circuit.

Application of MBB02070C2322FCT00

MBB02070C2322FCT00 has a wide range of applications, primarily in electronic circuits and systems. It can be used to properly design low resistance circuits and set up accurate resistive value. Therefore, it is used in a range of industries, including automotive, medical, power, aerospace, avionics, military, computer, communications, etc. For example, it can be used as a high-speed signal matching resistor in digital circuits. It can also be used as input impedance matching network for amplifiers, filters or oscillators, and as load impedance termination in antenna system. Additionally, MBB02070C2322FCT00 can also be used to precisely set up and measure circuit impedance, distortion or gain of any register circuit and as temperature compensating device.

Working Principle of MBB02070C2322FCT00

MBB02070C2322FCT00 essentially works on the principle of Ohm’s Law. It consists of a dielectric medium that resists electric current. When current passes through the resistor, it generates a voltage drop along the resistance of the terminal leads. This voltage determines the amount of resistance which then produces a linear current.The amount of current passing through the MBB02070C2322FCT00 depends on the type, size, power rating and the resistance value of the resistor. The standard voltage can be as high as 0.5 volt when performing at rated temperature. Its small size makes it possible to implement in dense, high current circuits where space is at a premium.

Conclusion

MBB02070C2322FCT00 is a Through Hole resistor that is used in many industries and applications. It works on the principle of Ohm’s Law, through which it generate a voltage drop along its resistance which determines the amount of resistance. Its small size makes it a great option for high current circuits where space is limited.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description