MBB02070C2328FC100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through-hole resistors, also known as THRs, are one of the most common components used in electronics. They are most commonly used to regulate voltage and current flow within electronic circuits. They come in a variety of sizes and shapes, and can be surface-mount or through-hole mounted. They can also be purchased with a variety of different resistance values.

MBB02070C2328FC100 Application Field and Working Principle

The MBB02070C2328FC100 is a through-hole resistor with a resistance value of 2K Ohms and a tolerance of ± 5%. It is a four-terminal resistor, which means it has two separate terminals connected to the resistor body, and two additional terminals that extend out the back of the resistor. These two terminals are used to measure the resistance. The resistor also comes with an insulation kit, which helps protect against short circuiting.

The MBB02070C2328FC100 is designed for general-purpose applications, such as voltage regulation, current control, and noise reduction. It can also be used in filtering circuits, and is suitable for use in low-power, high-density applications.

The working principle of the MBB02070C2328FC100 is simple. It consists of a resistive element that is connected across two terminals. When a current is applied to the resistor, it will produce an electrical resistance, which will then limit the amount of current that can flow through the circuit. The resistance can be adjusted by applying a voltage to one of the terminals, or by changing the physical size of the resistor.

Advantages of Through Hole Resistors

The main advantage of using through hole resistors instead of surface-mount resistors is that they are much easier to handle and replace if needed. They are also less susceptible to mechanical shock, and can handle higher voltage and power levels than surface-mount resistors. Additionally, because of their larger physical size, they are better able to dissipate heat, which increases their reliability. Finally, through hole resistors are usually cheaper than surface-mount resistors, making them a cost-effective option.

Conclusion

The MBB02070C2328FC100 is a general-purpose through-hole resistor with a resistance value of 2K Ohms and a tolerance of ± 5%. It is designed for a variety of applications, including voltage regulation, current control, and noise reduction. The working principle is simple: current is applied across the resistor, and the resistance produced limits the amount of current that can flow through the circuit. Through-hole resistors are advantageous in that they are easy to handle, less susceptible to mechanical shock, and can dissipate more heat than surface-mount resistors.

The specific data is subject to PDF, and the above content is for reference