MBB02070C6811FCT00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are important components widely used in electronic circuits. They are used to control current and voltage and provide protection against overload and short-circuit protection. MBB02070C6811FCT00 is a Through Hole Resistor that can be used in high current and voltage applications.

The MBB02070C6811FCT00 is a type of linear, axial lead-type or “through-hole resistor.” Its construction consists of a heat-resistant ceramic core and a metal wire lead. The metal wire leads are inserted through opposite ends of the core and are welded to a conducting path on each end. An insulating coating is then applied over the metal leads and the assembled structure is mounted on a printed circuit board.

The MBB02070C6811FCT00 has a 2-ohm resistance value, a maximum rated current of 0.70A, a maximum voltage drop of 1000V, and a power rating of 0.49W. It is suitable for applications that require high-precision current or voltage regulation, such as AC/DC power supplies and power amplifiers.

The primary working principle of a Through Hole Resistor such as MBB02070C6811FCT00 is Ohm’s Law. This law, which states that current is proportional to the applied voltage, is commonly used to calculate the current through an electronic component when a certain voltage is applied across it. The resistor has two terminals, the positive (+) and the negative (-). Based on Ohm’s Law, the current that flows through the Resistor is proportional to the applied voltage across its terminals, and is inversely proportional to the resistance value of the Resistor.

Another important thing to consider when selecting a Through Hole Resistor is the power rating. The MBB02070C6811FCT00 has a power rating of 0.49W, which indicates that it can handle 0.49 watts of power safely. The power rating must be chosen carefully, as a too-low power rating could lead to an overheating of the Resistor, which could potentially lead to dangerous situations. In general, larger resistor values require higher power ratings.

In summary, the MBB02070C6811FCT00 is a Through Hole Resistor suitable for high-precision current and voltage regulation applications. It has a resistance value of 2 ohms, a power rating of 0.49W, and a maximum voltage drop of 1000V. Its working principle is based on Ohm’s Law, and its power rating must be chosen carefully in order to avoid any potential overheating of the Resistor.

The specific data is subject to PDF, and the above content is for reference