MBB02070C7322DC100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are used in many electronics applications where precise and controlled resistance is needed. The most common types of Through Hole Resistors are surface-mount, resistor array, and lumped-element types.

MBB02070C7322DC100 is a particular Through Hole Resistor. It is a surface-mount resistor with two metal terminals, also known as a Surface Mount Resistor. It is made of a substrate material, such as glass-filled epoxy, and includes metal electrodes that allow it to be connected in electrical circuits.

The resistance of MBB02070C7322DC100 is fixed and it has a tolerance value of ±1oh. The value is fixed and it will not change over time, even when exposed to high temperatures. It is also designed to have good noise insulation and has low DC erosion resistance.

The applications of MBB02070C7322DC100 include power supplies, electric motors, medical equipment, and automotive electronics. In electric motors, the resistor helps regulate the speed of rotation. It is also used in power supplies, to prevent the flow of too much current and prevent short circuits. In medical equipment and automotive electronics, it helps reduce noise and improves system stability.

The working principle of MBB02070C7322DC100 is relatively simple. When the two metal terminals are connected in an electrical circuit, the current flows through the resistor and its value is proportional to the voltage applied. The current will have some resistance through it, and this resistance dissipates power as heat. Thus, the resistor can be used to limit the amount of current in a circuit, or to reduce the voltage of a signal.

In summary, MBB02070C7322DC100 is a Through Hole Resistor that is designed with fixed resistance and tolerance value of ±1ohm. It is commonly used in electric motors, power supplies, medical equipment, and automotive electronics. Its working principle is quite simple - when the two metal terminals are connected in an electrical circuit, the current will flow through the resistor and its value is proportional to the voltage applied.

The specific data is subject to PDF, and the above content is for reference