MC100EP445FAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC100EP445FAG is a high-speed transceiver from ON Semiconductor with some specific features; this device is suitable for different purposes where an exact serial data signal is required in order to minimize the ‘glitches’’ or signal distortion caused by external environment such as noise, electromagnetic interference (EMI) or the like.

Classified as an interface-specialized device, the MC100EP445FAG was designed to deliver high data rate with very low distortion suitable for SONET/SDH, Fibre Channel, Infiniband and OTN, amongst others. It is a very common choice for high-performance data communication applications.

The device was designed with four main components, out of which one is the input/output transceiver, the second one the PLL logic and the third the VCO and the fourth is the Calibration logic, the rest being included secondaries.

The Input/Output transceiver, as the name implies, is the primary port that has to be connected to the power supply. This transceiver is a differential input/output, dual output, low-power, high-performance type, often used in differential applications. It is fully differential transceiver; this means that it has both positive and negative voltage values from the power supply and is able to transmit both data and clock signals.

The output port of the transceiver is the primary port that is used to transmit signals. It is a differential type port and supports data rates between DC and 2.488 Gbps. This is further switched between DC and 4.53Gbps with the help of a buffer at the output port, as mandated by the protocol being used.

The second component of the device is the PLL (Phase-Locked Loop) logic. This logic, as the name implies, is used to lock or characterize the signal’s phase or frequency. This logic assists in detecting and controlling the signal’s amplitude and adjusts the signal’s frequency automatically and to a great degree of accuracy.

The third component is the VCO (Voltage Controlled Oscillator). This component helps to achieve the desired frequency range and it is also used to assist with adjusting the signal strength. The VCO can be adjusted from 50MHz-2.5GHz, subject to its implementation.

The fourth component is the Calibration logic. This component is used to achieve the calibration of the signal. This process occurs whenever the signal is disturbed; the component measures the signal’s frequency, amplitude, and phase and adjusts their parameters accordingly.

To further enhance the device’s functionality, several options are available, such as the ability to disable FIFO logic, PLL Sleep logic and Pre-emphasis logic. The FIFO logic helps in shaping and minimizing the data jitter; this logic also reduces the amount of penalty time on the output stage. The PLL Sleep logic, on the other hand, helps prevent the PLL from entering a power-saving mode every time the input is determined to be idle. Finally, the Pre-emphasis logic offers an adjustable output overshoot to further improve jitter and data rate performance.

In conclusion, the MC100EP445FAG is a high-speed transceiver from ON Semiconductor, which is optimized for multiple serial data signaling applications. Its features and options makes it a great option for data communications that require high-speed, low-distortion, low-energy consumption and rich control options.

The specific data is subject to PDF, and the above content is for reference