MC10EP131FAR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MC10EP131FAR2 is a high performance CMOS Voltage Mode Logic - Flip Flops that provides faster rise and fall times than conventional TTL logic ICs. Their small size, low cost and high speed makes them suitable for use in a wide range of applications. This device is used for logic shifting and latching, counter and timer functions, and even gate operations in digital logic systems.

The MC10EP131FAR2 consists of two D-type flip-flops, each with complementary true (Q) and complementary complement (Q’) outputs. The two flip-flops are connected in series and activated using the SET and RESET pins. The logic signals from the SET and RESET pins act on the flip-flops sequentially. If the SET input is low and the RESET input is high, then the first flip-flop is reset and the second flip-flop will be set. Conversely, if the SET input is high and the RESET input is low, then the first flip-flop will be set and the second flip-flop will be reset. The inputs of each flip-flop stage are provided with +5V tolerant Schottky clamps, eliminating the need for external pull-up resistors.

The MC10EP131FAR2 is used in a variety of applications. One such application is a data register. Data is consciously written into the register by applying the input signal to the SET pin, which sets the first flip-flop and loads the data into the register. The data written into the register is then not lost until it is reset. By applying the RESET signal to the reset pin, the content of the register is set to zero. Similarly, the MC10EP131FAR2 can be used in counter and timer circuits. By applying a pulse signal to the RESET pin, the timer begins counting. After the preset time interval is reached, the counter resets itself, indicating that the desired interval has elapsed.

The MC10EP131FAR2 can also be used in the design of various types of digital logic gates such as NOR, NAND, OR and AND gates. The two inputs of the gate, A and B, are logically combined according to the gate type to produce the output, C. The two outputs of the two flip-flops, Q and Q’ are used as the inputs of the gate. The circuit also includes an enable (EN) input and an output enable (OE) input. The EN input sets the state of the first flip-flop, while the second flip-flop is held in a reset condition. When the OE input is asserted, the output of the gate is asserted and the content of the register is transferred to the output.

Overall, the MC10EP131FAR2 is a versatile, high performance and high speed logic IC that can be used in a wide variety of applications. With its small size and low cost, it is ideal for use in smaller digital systems and applications where higher performance and high speed are required.

The specific data is subject to PDF, and the above content is for reference