Allicdata Part #: | MC4-1005JE-ND |
Manufacturer Part#: |
MC4-1005JE |
Price: | $ 0.00 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES ARRAY 4 RES 10M OHM 8SMD |
More Detail: | 10M Ohm ±5% 750mW Power Per Element Isolated 4 Res... |
DataSheet: | MC4-1005JE Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Number of Pins: | 8 |
Height - Seated (Max): | 0.030" (0.76mm) |
Size / Dimension: | 0.750" L x 0.750" W (19.05mm x 19.05mm) |
Supplier Device Package: | 8-SMD DIP |
Package / Case: | 8-SMD |
Mounting Type: | Surface Mount |
Applications: | -- |
Operating Temperature: | -55°C ~ 180°C |
Temperature Coefficient: | ±50ppm/°C |
Power Per Element: | 750mW |
Series: | MC4 |
Resistor-Ratio-Drift: | -- |
Resistor Matching Ratio: | -- |
Number of Resistors: | 4 |
Tolerance: | ±5% |
Resistance (Ohms): | 10M |
Circuit Type: | Isolated |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
MC4-1005JE is a Resistor Network, Arrays designed for use in voltage division and current limiting applications. This network is a four resistor array constructed from precision machined metal film resistors. The device is available in 3 different resistor tolerances, including 1%, 2% and 5%. These resistor arrays allow designers to have precision divider networks in just one package.
The MC4-1005JE network is used primarily as a voltage divider, where voltage division can provide isolation between two circuits or parts of a circuit. It can also be used for current limiting, where the network can limit the maximum amount of current through one of the paths where the current is divided.
The device is also capable of providing gain, as each resistor can provide a small amount of gain in proportion to the total resistance of the network. For example, in a voltage divider, a voltage gain of 1, with a network of 4 resistors, can be obtained with one resistor having a resistance of 2, and the other 3 having a resistance of 1 each.
The MC4-1005JE network can also be used in filter designs, where it can be used to form a band-pass or low-pass filter by connecting each resistor to a different capacitor. This can be used to filter out higher frequencies from the signal passing through the network or to limit the range of frequencies in the signal.
The MC4-1005JE network is constructed with precision machined metal film resistors. The resistors are made from metal film that is rolled onto an aluminum oxide ceramic substrate. The metal film is then accurately laser trimmed to meet the desired resistance tolerance values. This gives the network stable and highly repeatable resistance values in a number of different environments.
The MC4-1005JE network has a number of advantages. It is available in three different resistor tolerances, which allows designers to select their tolerance needs. The network also has excellent temperature and voltage stability. The device is also highly reliable and offers a long life span.
Overall, the MC4-1005JE network can be used in a wide variety of applications, from voltage division and current limitation to gain, filtering, and more. It is a highly reliable device that is available in three different resistor tolerances and offers excellent temperature and voltage stability.
The specific data is subject to PDF, and the above content is for reference
RES NTWRK 18 RES 47 OHM 36LBGA47 Ohm 1% ...
RES NTWRK 32 RES 56 OHM 36LBGA56 Ohm 1% ...
RES ARRAY 4 RES 39 OHM 120639 Ohm 5% 62....
RES ARRAY 4 RES 43 OHM 080443 Ohm 5% 62....
RES ARRAY 4 RES 120 OHM 0804120 Ohm 5% 6...
RES ARRAY 2 RES 300 OHM 0606300 Ohm 5% 6...