MC74ACT640MEL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MC74ACT640MEL is a member of M-Series high-speed, low power Complementary Metal-Oxide Semiconductor (CMOS) logic circuit family. It is a Hex Schmitt Trigger Buffer (STB) that has tri-state output capability. It is the ideal device for low voltage and high speed applications such as various peripheral circuits of microcomputers and in driving liquid crystal display panels. It utilizes the same input and output characteristics and pinouts that have been developed for CMOS logic. Its outstanding features include low quiescent current, high output drive capability and moderate speed performance.

The logic-level control featured in the MC74ACT640MEL provides logic gate inputs in TTL compatible Schmitt Trigger (SC) formats and is designed to be used as an input to the standard TTL and LS TTL logic families. Its Schmitt Trigger Design outperforms and outperforms comparators. It offers a fast response time, high-speed operation and excellent noise immunity in noisy environments. Its outputs can be used to drive short line lengths in low voltage, high speed logic and clocks with fast rise and fall times.

The MC74ACT640MEL is an ideal device for applications such as simple count and shift circuits, voltage shift circuits, key scanning, filtering, and debouncing. It can be used as an analog switch with fast settling times, low distortion and low switching noise. It has high operation speed and low power consumption, making it suitable for low-power applications.

The MC74ACT640MEL is a hex Schmitt Trigger Buffer. It consists of six individual gates and has a maximum propagation delay of 12ns. Each gate has a pull-up resistor that can be connected to VCC or pulled to ground. The gates have a voltage threshold of 2.4V and have a relatively wide hysteresis. It uses a standard 14 pin, 300 mil DIP package for easy assembly.

The working principle of MC74ACT640MEL is based on the combination of Schmitt Trigger and tri-state logic. A Schmitt Trigger is an analog comparator with hysteresis, usually formed from a positive feedback integrating amplifier. This kind of amplifier has two distinct reference levels which acts as a threshold detector and produces a saturated output voltage. The input voltage is compared with the upper and lower reference levels. When the input voltage is equal to or higher than the upper reference level, the output is set to the high level, and when the input voltage is equal to or lower than the lower reference level, the output is set to the low level.

The tri-state buffer is used to enable and disable the output with respect to the enable input. When the enable input is active, the outputs are driven to the state defined by the logic inputs, and when the enable input is inactive, the outputs are disabled, and pull up resistors will keep the outputs in the high impedance state. The working principle of MC74ACT640MEL is that it translates the logic signals into the voltage output with the help of Schmitt Trigger and tri-state buffer.

The MC74ACT640MEL is suitable for a variety of applications due to its features such as low quiescent current, high output drive capability, and low power consumption. It can be used for a variety of different applications such as key scanning, filtering, and debouncing, voltage shift circuits, shift and count circuits, and driving LCD display panels. It also has a fast response time and excellent noise immunity that makes it suitable for applications in noisy environments. It also provides an easy installation as it comes in a standard 14 pin, 300 mil DIP package.

The specific data is subject to PDF, and the above content is for reference