MDA-6/10-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are safety components used in electrical and electronic equipment to prevent situations, such as short circuits or overloads, from causing damage to the equipment and its components. Fuses protect the systems and circuits they are applied to by monitoring electrical current flows and disconnecting the flow when the current reaches a level where it is unsafe to continue. The MDA-6/10-R are designed to provide reliable and effective protection during fuse failure.

The MDA-6/10-R is a relay based fuse and it is typically used in industrial and commercial applications. It is designed for use in circuit breakers, control panels, and other equipment for overcurrent protection. It uses a combination of mechanical and electrical components to detect an overcurrent and initiate a response. The MDA-6/10-R can detect both AC and DC overcurrents, and actuates an alarm in the event of an overcurrent condition.

The MDA-6/10-R fuse works by sensing a fault in the current which it is monitoring and actuating a relay in response. When a fault is detected, the relay is activated which then initiates the response. The relay will actuate a signal to indicate the existence of an overcurrent condition, and also trip the circuit breaker or other switch that is being over current protected. The relay will typically also interrupt the current in the protected circuit, thereby providing protection from further harm or damage.

The MDA-6/10-R fuse is designed to provide reliable and effective current protection in a wide range of applications, such as circuit breakers, control panels, and other equipment. It is capable of tripping the system in case of an overcurrent, while providing a visual and audible alarm for additional safety. It is also capable of monitoring and providing alternative feedback signals, such as LED or load line, to assist with diagnosing any potential overcurrent conditions.

The working principle of the MDA-6/10-R fuse is that it is designed to detect and monitor the current in the protected circuit. When an overcurrent is detected, the relay is actuated and the current is disconnected or diverted from the protected circuit. The current is then monitored to ensure the disconnection has occurred and that the overcurrent has been prevented from damaging the equipment or causing a potential hazard.

The MDA-6/10-R fuse is a reliable and effective way of protecting electrical and electronic equipment from damage and other potential hazards. The device is designed with safety in mind and is capable of tripping the system in the event of an overcurrent, while also providing feedback signals for the user to diagnose any potential problems. The device is highly efficient and reliable, making it a viable and safe choice for any application.

The specific data is subject to PDF, and the above content is for reference