MDL-20-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are an integral component of any industrial or electrical system in order to protect from electrical overloads. One such type of fuse, the MDL-20-R, is a 20 ampere fuse with a rated breaking capacity of 6,300A (rms). Ideally, the MDL-20-R fuse should be installed in series with the protected devices or circuits. It is composed of a metallic strip or wire surrounded by two semiconducting bodies that are connected to both ends of the fuse.

The fuse is designed to control and protect electrical circuits from current overloads and short-circuits. This is done by the semiconducting material which will fuse into a solid block when the current exceeds its rated value. This solid block will then reduce the current and prevent arcing and sparking, which can cause a fire or other hazardous effects. The fuse will also protect other components such as a shunt or coil in the circuit from becoming overheated and possibly igniting.

The MDL-20-R fuse is available in various voltage ratings, including 125V, 230V and 277V. The rated voltage of the fuse should match the expected voltage in the circuit being protected. The fuse can also be used with systems operating at either AC or DC voltage, but it is not suitable for pulses or transients. Additionally, the fuse should be tested periodically to ensure it is still functioning correctly.

The working principle of the MDL-20-R fuse is relatively simple. The fuse’s two semiconducting bodies are connected in series to the protected circuit. When the current reaches its rated amperage, the fuse will cause the resistance of the semiconducting bodies to increase. This in turn generates heat, which causes the metallic strip in the center of the fuse to melt or expand, breaking the connection between the two bodies. This will result in a decrease in current, protecting the circuit from any harm.

The most common application for the MDL-20-R fuse is in the field of industrial electrical systems, particularly in distribution and protection boards. It is also used in domestic and commercial settings, where it is usually found in lighting and power distribution circuits to protect cables from over-currents. Additionally, the fuse is well-suited for low-voltage DC and AC systems, where it serves to protect against short-circuits and over-currents.

In conclusion, the MDL-20-R fuse is an effective component for electrical systems where over-currents and short-circuits must be prevented. It is composed of two semiconducting bodies connected in series, which will increase their resistance when the current reaches its rated amperage. This will result in a decrease in current, protecting the circuit from any damage. The MDL-20-R is most commonly used in industrial electrical systems, but it is also suitable for domestic and commercial settings.

The specific data is subject to PDF, and the above content is for reference