MDM-51SHC10F-A174 Cable Assemblies

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

D-Sub Cables consist of two types of cables used to connect male and female connectors to a variety of different applications. One of the most popular cables used for this purpose is the MDM-51SHC10F-A174 cable. This cable is used in a number of applications, including, but not limited to, computer peripheral devices, industrial automation systems, broadcast and production equipment, as well as audio and video products.

MDM-51SHC10F-A174 was designed with 50 Ohm impedance, a minimum velocity of propagation of 80%, and a maximum of 110%. It is manufactured with a standard length of 10 feet, is able to handle a temperature range of -50 degrees Celsius to +105 degrees Celsius, and is rated to 15 pounds per foot. This cable is constructed with a stranded 26 AWG copper center conductor and a 90% tinned copper braid shield.

MDM-51SHC10F-A174 has a wide variety of applications. Most notable is the use of this cable to facilitate connections between computer peripheral devices and devices that utilize D-Sub connectors, such as monitors, keyboards, mice, and other devices. In addition, this cable can be used in a number of industrial automation systems, such as PLCs (Programmable Logic Controllers) and HMIs (Human Machine Interfaces). This type of cable can also be used for broadcast and production equipment, including cameras, switchers, routers, and more. Additionally, MDM-51SHC10F-A174 is often used for digital audio and video applications, such as connecting DJ mixers, amplifiers, and sound recorders.

In order to properly understand the workings of MDM-51SHC10F-A174, it is important to understand the differences between male and female connectors. The male connectors are typically pins that are inserted into the female connectors, which are typically sockets. The female connectors often have a hole in the center that allows the male connector pins to insert into it, allowing the connection to be made with the use of a screw or locking mechanism. This type of connector is typically used for larger D-Sub connectors, such as DB25. However, it is also possible to use smaller D-Sub connectors with male and female connectors, such as DSUB 9.

Once the connection is made, the male and female connectors must be wired together using the cable provided. The pins in the male connectors will typically be labeled when sold, allowing the user to determine which wires should be connected to which pins. The number of wires will vary depending on the type of application the cable is being used for. For example, cables used for digital audio and video applications may have eight or more wires, while ones used for industrial automation systems are often only four or five.

Once the wires are in place, they are wrapped with the braid shield of the cable. This is done to protect the connection from interference from external sources, such as radio signals. After this is complete, the outer jacket is applied to the cable in order to protect it from physical damage. This is then followed by strain relief, which is designed to prevent the wires from becoming slack and pulling away from the connectors.

The MDM-51SHC10F-A174 is a versatile cable that is used in a number of different applications. Its male and female connectors are designed to make connections between a variety of different devices, and its braid shield provides protection against external sources of interference. Additionally, the strain relief keeps the wires in place and ensures a strong connection between the devices is maintained.

The specific data is subject to PDF, and the above content is for reference