MDQ-1/8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are designed to protect electrical circuits from damage caused by too much current. The MDQ-1/8 is a medium duty quick acting fuse designed for circuit protection in applications with high inrush currents. It is offered in both single and dual ratings, with current ratings of 125A and 250A respectively.

The construction of the fuse is fairly simple. It consists of a thin wire fuse element contained in a glass-encased fuse housing. The fuse element is connected to two terminals, which allow it to be connected to the circuit it is protecting. The fuse element is designed to melt when the current going through it exceeds a certain value, thus breaking the circuit and preventing further damage.

The MDQ-1/8 fuse is designed to quickly react to high inrush currents. That means that it has a lower voltage drop, allowing it to open faster and protect the circuit it is connected to. Additionally, since the fuse element in the MDQ-1/8 is designed to melt quickly, it minimizes thermal and radio interference that can be caused by a slow fuse operation.

The MDQ-1/8 is typically used in industrial, commercial, and institutional applications, such as racks of servers, motor control centers, and lighting systems. In these applications, the MDQ-1/8 fuse is usually installed near the electrical load, allowing it to quickly detect and disconnect the circuit it is protecting in the event of an overload. Other applications include variable frequency drives, switchgear, and power systems.

When choosing the correct size and type of fuse for a particular application, it is important to consider the following factors. First, it is important to consider the amount of current the fuse needs to protect the circuit against. Second, the environment in which the fuse will be installed must also be taken into consideration. This may include considerations such as temperature, humidity, and vibration, which can all affect the performance of the fuse.

Finally, it is important to ensure that the fuse is properly rated for the application it is intended for. This means that the fuse must have the same amperage rating as the maximum current draw of the circuit it is protecting. If the fuse is too small, it will not be able to protect the circuit in the event of an overload, and could lead to permanent damage.

The MDQ-1/8 is a versatile fuse designed for protecting electrical circuits from damage caused by over currents. It is designed to quickly react to inrush currents, has a low voltage drop, and minimizes radio and thermal interference. The MDQ-1/8 can be used in a variety of applications, such as motor control centers, switchgear, and variable frequency drives. When choosing the size and type of fuse, it is important to consider the amount of current to be protected, the environment, and the proper amperage rating.

The specific data is subject to PDF, and the above content is for reference