MEA1D0509SC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters can be used to transfer electrical energy from a source of DC power to a load with a different DC voltage level, galvanically isolating the voltage source from the load. One example of a DC-DC converter is the MEA1D0509SC. This device is a step-down DC DC converter that is used for uninterruptible power supply, control circuits, battery charging systems, LED lighting systems, and other applications.

The MEA1D0509SC is a Low Input Voltage, High Efficiency Buck Converter capable of delivering up to 0.5A of output current. This DC DC converter utilizes advanced synchronous rectification technology which makes it capable of a high efficiency rate up to 95%. It has an input voltage range of 5V to 32V and an output voltage range of 0.8V to 5V (adjustable). The switching frequency is adjustable up to 1 MHz, allowing for smaller footprints and low EMI.

The MEA1D0509SC features built-in protections to ensure safe operation. These include short circuit protection, over-temperature protection, over-voltage protection, under-voltage protection, and external soft-start time adjustment. The built-in protections also ensure the device works under heavy load and high input voltage. The device also features a shutdown mode, a power good output signal, and a power fail output signal.

In terms of its working principle, the MEA1D0509SC DC-DC converter utilizes a buck converter topology. In a buck converter, the input voltage is switched by an internal switch (typically a power MOSFET) and connected to a filter inductor. This forms a power cell. On the other side of the power cell is the output voltage, which is formed by the output capacitor. The output voltage of the power cell is regulated to a set voltage (determined by the feedback voltage) by the error amplifier.

The conversion process of the MEA1D0509SC is as follows. The internal switch is turned on and the current starts to flow from the input to the inductor. The current builds up until the inductor current reaches it maximum rated current (determined by the feedback voltage). At this point, the switch is turned off and the current in the inductor is released into the output capacitor, and the output voltage is limited by the feedback voltage. This process repeats itself at a fixed rate (determined by the oscillator frequency) and the output voltage is maintained at a constant level.

The MEA1D0509SC is a highly efficient and reliable DC-DC converter, ideal for a variety of applications. Its built-in protection features ensure a safer operation, while its adjustable switching frequency allows for customizable operation. Its working principle is based on the buck converter topology, utilizing a power cell and an error amplifier for regulation.

The specific data is subject to PDF, and the above content is for reference