MF0207FRD52-18R2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors can be used to achieve specific current and voltage levels within a circuit. From limiting current flow to equalizing a circuit’s response to potential differences, through hole resistors are a versatile tool in an electronic design engineer’s toolkit. The MF0207FRD52-18R2 is a through hole resistor of a particular size, designed for a specialty application.

The MF0207FRD52-18R2 is a three-terminal through hole resistor. It is particularly well-suited for high voltage applications, such as those that may be found in a power line or industrial system. Its design takes into account the varying needs of such locations, such as ensuring elements are fitted with fully sealed options, as may be needed in damp or corrosive environments. It also has a low thermal resistance, making it an attractive option for areas with a high ambient temperature. The absence of mechanical components is beneficial for applications that may be subject to rigorous environmental conditions.

The MF0207FRD52-18R2 is a unique resistor in that it can handle both higher direct current and higher peak voltage than most resistors of its type. It can manage very high powers—typically up to 30 Watts—under all expected ambient conditions. This allows designers to meet high voltage requirements, such as in automotive applications, while also taking care of more normal needs within the same device.

In addition to its high power capabilities, the MF0207FRD52-18R2 also boasts a wide resistance range for its dimensions. It is able to handle as much as 3500 Ohm within a 0.125 by 0.25 inch package. Inherent isolations (the area between test points) of 350 volts make it particularly suited for use in electrical systems where environmental conditions require isolation of different levels of voltage.

The MF0207FRD52-18R2, as a through hole resistor, carries its current through a resistor mounted on a printed circuit board (PCB). The broad range of current and voltage capabilities built into the resistor enables its use in a wide variety of designs, from discrete resistors on a single board to power converters needing multiple resistors. Additionally, the resistor is available in tape and reel packaging, which allows for automated placement via standard surface-mount equipment.

The working principle of the MF0207FRD52-18R2 is simple. In its most basic form, it is a component that has an electrical resistance which resists the flow of electrical current. The resistor Kω rating is determined by its physical size. The more Kω, the larger the resistor and the greater its resistance to current. The heat that is produced due to this resistance can be dissipated through the use of a heat sink or finned heat sink mounted to the resistor.

The MF0207FRD52-18R2 is ideal for use in industrial applications where high-temperature environments and high power levels are present. Its versatile resistance range, wide voltage capabilities, and durable construction make it a great choice for handling a variety of power applications. By using the MF0207FRD52-18R2, designers are able to meet the demanding needs associated with a wide range of industrial applications.

The specific data is subject to PDF, and the above content is for reference