MF0207FRE52-649R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

 Through Hole Resistors are an important component in many types of modern electronic equipment. The MF0207FRE52-649R being one of the most common models used in circuit boards, it is imperative to understand not only its application field but also its working principle.

 When selecting a component for a circuit, it is imperative to make sure that the current, voltage and power requirements are met by choosing an appropriate component with specific specifications. The MF0207FRE52-649R is an appropriate choice when these electrical requirements are concerned and this resistor has an ability to safely handle up to 52 volts and a maximum of 649 Ohms of resistance. When using this resistor, it is recommended to read the manufacturer’s datasheet for important information in order to ensure a safe working environment and to prevent any damages to the component or the circuit.

 The two major applications of the MF0207FRE52-649R by far are load sharing and current limiting. As a load sharing resistor, the resistor is connected in parallel with the load and reduces the current within the circuit by limiting the amount of current that the load can draw. One advantage to this type of application is that it prevents a breach in the circuit by succeeding in allowing the current to flow. As a current limiting resistor, this further limits the current within the circuit by also limiting the amount of current the circuit can draw but produces a higher voltage drop.

 Now that the applications have been stated, the working principle and the underlying theory must now be discussed. The fundamentals of the MF0207FRE52-649R can be attributed to Ohm’s Law and the components of Resistance, Voltage and Current. Ohm’s Law states that the voltage is equal to the product of a certain resistance and the current within the circuit.

 The resistor behaves in the same manner but in an opposite manner. That is to say, when resistance is increased, current flow is decreased, and vice versa. This allows the MF0207FRE52-649R to be set at the appropriate settings to perform precise operations within certain applications. In one application, if the power requirements stated that 12 volts is needed for power, the voltage can be easily adjusted using the MF0207FRE52-649R by selecting a value close to 12.

 It is important to consider thermal effects when using the MF0207FRE52-649R. The resistor will produce heat when operating and the dissipation capabilities will be reduced if the load exceeds the specified parameters. Thus, it is recommended to use a proper heatsink in order to keep the component at operating temperature.

 The MF0207FRE52-649R this ultimately plays an integral role when designing and prototyping circuit boards. This resistor is designed to accept voltages up to 52 volts with a resistance of 649 ohms which allows for the proper operation of the circuit through a precise current adjustment. The MF0207FRE52-649R will allow for safer operation as the current flow through the circuit will be greatly reduced and also provide more efficient operation by allowing for the production of immediate power.

The specific data is subject to PDF, and the above content is for reference