Allicdata Part #: | 33KADTR-ND |
Manufacturer Part#: |
MFP-25BRD52-33K |
Price: | $ 0.03 |
Product Category: | Resistors |
Manufacturer: | Yageo |
Short Description: | RES 33K OHM 1/4W 0.1% AXIAL |
More Detail: | 33 kOhms ±0.1% 0.25W, 1/4W Through Hole Resistor A... |
DataSheet: | MFP-25BRD52-33K Datasheet/PDF |
Quantity: | 10000 |
5000 +: | $ 0.02795 |
10000 +: | $ 0.02732 |
25000 +: | $ 0.02639 |
50000 +: | $ 0.02588 |
125000 +: | $ 0.02563 |
Series: | MFP |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 33 kOhms |
Tolerance: | ±0.1% |
Power (Watts): | 0.25W, 1/4W |
Composition: | Metal Film |
Features: | -- |
Temperature Coefficient: | ±25ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.094" Dia x 0.248" L (2.40mm x 6.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors, also known as fixed resistors, are one of the most widely used electronic components and are one of the most common components in electronics society today. The MFP-25BRD52-33K is an example of a Through Hole Resistor, and this article will discuss its application field and working principle.
When it comes to Through Hole Resistors, it is important to know the material they are made of, as this can affect the way in which they work. The MFP-25BRD52-33K, for example, is made of carbon, which has a range of properties that make it ideal for use in electronics. The carbon in the MFP-25BRD52-33K ensures that it can withstand wide amounts of temperature, from relatively low to high, while also allowing for a low level of noise on the electrical current. The low resistance and low current noise levels allow it to be used in applications where noise sensitivity is key, such as in communication and robotics.
In terms of its application fields, the most common use for the MFP-25BRD52-33K is in line termination and shielding circuits. Line termination circuits typically involve having at least two resistors, one at each end of a wire, so that when a current runs along the wire, it can be managed safely. Moreover, the low current noise levels make the MFP-25BRD52-33K ideal for use in shielding circuits, where noise between two wires must be kept to a minimum.
The key to understanding the working principle of the MFP-25BRD52-33K through hole resistor is to know the way in which electricity flows through it. Basically, electricity enters one end of the resistor through a wire, flows through the carbon matrix, and exits the other end. This flow of electricity is called the ‘steady state current’, and the amount of resistance the resistor presents to the current is known as its resistance value. With the MFP-25BRD52-33K, the resistance value is approximately 33kΩ, or 33,000 ohms, allowing for a balance between current modulation and voltage management.
The MFP-25BRD52-33K also comes with the ability to dissipate heat, which can be useful in certain applications. As electricity passes through the resistor, it causes friction, which produces heat. The MFP-25BRD52-33K is designed to better dissipate this heat, ensuring it can stay within a safe operating temperature. This makes it ideal for use in embedded systems and other applications where heat management and heat dissipation are critical.
In conclusion, the MFP-25BRD52-33K is an excellent Through Hole Resistor that is suitable for a wide range of applications. It is made of carbon, has low levels of noise, is able to dissipate heat, and has a resistance value of 33kΩ. This makes it ideal for use in line termination and shielding systems, as well as embedded systems. The working principle is fairly simple, as electricity passes through the carbon matrix with a certain amount of resistance. Overall, the MFP-25BRD52-33K is a versatile electrical component that can fit a variety of needs.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...