MFP200BRD52-10K1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MFP200BRD52-10K1 is one of the many through hole resistors available today. It is a small and simple electronic component that fits easily into many electronic circuits. A through hole resistor is a type of resistor that has two metal legs or leads that pass through a board, allowing the resistor to be easily soldered onto a circuit board. These leads are connected to a cylindrical body, which contains a special conductive material, usually a carbon composition or a metal film element.

The MFP200BRD52-10K1 is a standard through hole resistor that has a resistance value of 10K ohms. This resistor is commonly used in low power and high power electronics circuits. It is also widely used in the design and manufacturing of components for the automotive, military, consumer, and audio/video industries. This resistor is rated for use in temperatures ranging from 0 to 85 degrees Celsius. It has a tolerance of plus or minus 5%.

The MFP200BRD52-10K1 is used in various application fields, including power supply, audio/video, automotive and audio, energy management and industrial automation. It is a popular choice for controlling the voltage and current in the circuits. In power supply, the resistor limits the amount of current that passes through the circuit, protecting components from over-current damage. In audio/video systems, the resistor controls the gain, volume, and other parameters of the audio or video signal. In automotive and audio systems, it is used to control the flow of electricity to other components, such as alternator, ignition, and lighting systems. In energy management systems, it is used to reduce the power consumption of the total system, while in industrial automation, the resistor can help control the start and stop times of motors and machinery, saving energy and increasing efficiency.

The MFP200BRD52-10K1 is a through hole resistor that works on the principle of electrical resistance. This means that the resistor is designed to reduce the flow of an electric current, although the exact amount of reduction will depend on the specific resistors used in the circuit. The resistance of the resistor is typically indicated by the color code printed on the resistor’s label. The color code gives an indication of the resistance value, which is usually given in ohms. The higher the resistance value, the lower the amount of current that can pass through the resistor. As an example, a 10K ohm (10,000 ohm) resistor can reduce the flow of current by up to 10,000 ohms.

In conclusion, the MFP200BRD52-10K1 is a through hole resistor that is widely used in electronic circuits. It has a resistance value of 10K ohms and can be used in a variety of application fields, from power supply to industrial automation. Its operation is based on the principle of electrical resistance, and the precise resistance value of this resistor is given in ohms, indicated by the color code printed on the resistor’s label. This resistor is commonly used for controlling the voltage and current in an electronic circuit, and helps to protect components from over-current damage.

The specific data is subject to PDF, and the above content is for reference