MFP200BRD52-6K4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are mainly used in electronic circuits for power limitation or signal attenuation. MFP200BRD52-6K4 is one of the most popular through hole resistors. This resistor is a high power resistor which can be used in a wide variety of applications and operating environments.

The MFP200BRD52-6K4 through hole resistor has four pins on the bottom side of the device. It is a surface mount device so four pads must be prepared on the pcb before the device can be soldered. The device is a metal oxide resistive element. It has an overall length of 200mm and is available in various resistance values, ranging from 1.00kΩ to 6.00kΩ. The resistor also has a low temperature coefficient and is suitable for high-speed applications.

The resistor is designed to dissipate 1 Watt of power at room temperature. The maximum power dissipation is 200W at a temperature of 125°C. It also operates over a wide temperature range, from -55°C to +125°C. The resistance to temperature coefficient of the MFP200BRD52-6K4 through hole resistor is about ±20 ppm/°C, which is very low compared to other resistors.

The operating principle of the MFP200BRD52-6K4 through hole resistor is based on the principle of resistance. Resistance is a force that opposes current flow. It is measured in ohms (Ω). When a voltage is applied to a conductor, a current will flow through the conductor. The amount of current that flows is determined by the amount of resistance present in the circuit. The amount of resistance can be changed by increasing or decreasing the number of turns in the resistor.

The main application fields of the MFP200BRD52-6K4 through hole resistor are in automotive, industrial, lighting, power, audio and telecom applications. The resistor can be used to limit the current, voltage, and power levels in the circuits. It can also be used as a voltage divider, gain control, current limiter, temperature compensator, and noise filter. The resistor is ideal for both AC and DC circuits.

In summary, the MFP200BRD52-6K4 through hole resistor is a high power resistor which is suitable for a wide range of applications. The device has four pins and is available in various resistance values. Its maximum power dissipation is 200W at 125°C and the resistance to temperature coefficient is ±20 ppm/°C. The device has a wide temperature range and can be used in automotive, industrial, lighting, power, audio, and telecom applications.

The specific data is subject to PDF, and the above content is for reference