MFP25SBRD52-200K

Through Hole Resistors are common electrical components found in all types of electronic devices. MFP25SBRD52-200K, a Through Hole Resistor, has many applications. It is a two lead, axial lead-style resistor with a maximum power rating of 200 Kilo-Ohms.

Applications of MFP25SBRD52-200K

MFP25SBRD52-200K is commonly used in low-power electronic circuit applications. It is often used in the power and signal conditioning stages, such as for filtering or signal splitting. It can also be found in motor controllers, amplifiers, and AC/DC power supplies. It is also used in remote control systems, ATE test systems, and HVAC systems.

In high-power applications, the MFP25SBRD52-200K can be used as a volt-ampere or current-limiting device. It can also be connected in series with other components to create a resistor divider that regulates the output voltage or current. Thus, it can be used in voltage regulators and current limiters.

Working Principle

MFP25SBRD52-200K works by connecting a resistance element between two electrical conductors (anode and cathode). This resistance element passes an electrical current through it when a voltage is applied to its terminal. In addition, it also inhibits the electric current by adding a voltage drop across its terminal. The amount of resistance it provides depends on the type of material and its physical shape.

The MFP25SBRD52-200K is a through hole resistor, which means that it requires holes drilled into a printed circuit board for installation. It has two leads, one positive and one negative, which connect to the circuit board using solder. The resistor itself is made up of a metal strip with a carbon-based coating, which forms the conductive portion of the device. The thick coating of the resistor allows it to handle up to 200 Kilo-Ohm of power, making it suitable for many power and signal conditioning applications.

The main benefit of the MFP25SBRD52-200K is its small footprint. This allows it to be used in places where space is limited. It is also relatively low cost, making it ideal for projects where space and cost are a major factor. This makes it an ideal choice for many high-power applications.

Conclusion

The MFP25SBRD52-200K is a Through Hole Resistor ideal for many applications. It has a maximum power rating of 200 Kilo-Ohms and requires holes drilled in the circuit board for installation. It is made up of a metal strip with a carbon-based coating, which forms the conductive portion of the device. It can be used in low-power electronic circuit applications as well as in high-power applications as a volt-ampere or current-limiting device. Due to its small footprint and low cost, it is an ideal choice for many power and signal conditioning applications.