MFP50SBBE52-4K12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as MFP50SBBE52-4K12, are characterized by being able to withstand higher temperatures and stresses than traditional surface mount resistors, withstanding up to 220°C. Furthermore, they are generally more rugged than their SMT counterparts.

The MFP50SBBE52-4K12 Through Hole Resistor is a four-terminal chip resistor that is commonly used in high-power circuits. It features a wide variety of sizes and power ratings, making it suitable for many applications. It has a voltage rating of 2.9 V to 5 V, a power rating of 5W to 40 W, and a maximum operating temperature of +220°C.

The MFP50SBBE52-4K12 Through Hole Resistor is typically used in circuits that require superior heat dissipation, as well as an increased power rating. It is typically used in power applications, such as voltage dividers, AC- and DC-power supplies, switching circuits, and motor control circuits. Additionally, it can be used in a variety of circuits that require high reliability and long life.

The MFP50SBBE52-4K12 Through Hole Resistor is based on the voltage divider principle. This means that when a voltage is placed across two resistors, the total current will be proportional to the inverse of the resistor values. In order to calculate the exact resistor values, a series of calculations must be carried out. Once the calculated values have been determined, the Through Hole Resistor can then be attached to the circuit.

The resistor is designed with four wires that extend from the top of the resistance element to the bottom. The top of the resistor is designed with four round, silver terminals. These terminals are designed to provide power and/or accurate measurements to the resistance element. The bottom of the resistor is designed with four round, black terminals. These terminals are designed to provide power and/or accurate measurements to the resistance element.

For best performance, the MFP50SBBE52-4K12 Through Hole Resistor should be oriented pointing upwards with regard to the power circuit. This orientation will ensure that the resistor is not exposed to any undue stresses, or subjected to any bridges or shorts. The resistor should also be kept away from any heat sources that could degrade its performance.

Once the MFP50SBBE52-4K12 Through Hole Resistor has been properly installed, it is important to regularly check the resistance element to ensure that it remains in optimal condition. Testing should include checking the continuity of the circuit, as well as verifying that the resistance element has not been exposed to any changes in temperature. Additionally, it is important to regularly check the four terminals for proper polarity, as well as to verify that the terminals are not corroded.

In conclusion, the MFP50SBBE52-4K12 Through Hole Resistor is a four-terminal chip resistor used primarily in power applications and circuits that require superior heat dissipation and increased power rating. Its design is based on the voltage divider principle, with four wires extending from the top and bottom of the resistance element. It should be oriented pointing upwards with regard to the power circuit, and regularly tested to ensure that it remains in optimal condition.

The specific data is subject to PDF, and the above content is for reference