Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

MFR-12FRF52-1K33 is a type of through-hole resistors found in the fields of industrial, automotive, military or aerospace applications. It is a relatively large fixed-value resistor packaged in an axial-lead configuration, allowing the resistor to be connected between the two ends of the device. It is often referred to as a thru-hole resistor because it has a hole through the center of the unit that facilitates the mounting of the resistor onto a PCB, terminal block or wiring harness.

The resistance usually range from 1 ohm to 500 ohms. It is formed by a combination of passive components such as resistors, capacitors, and inductors. The combination is designed so the direct current flowing through the circuit does not change and is kept at a constant value.

As with other surface-mounted resistors, this type of resistor can be used to reduce the current flow in a circuit, thus protecting the device driving the circuit. It can also be used to reduce the voltage level in a circuit, usually by creating an impedance in the form of a voltage divider. This helps to reduce the amount of power that is required to be dissipated in the circuit. In some cases, a MFR-12FRF52-1K33 can be used to act as a voltage clamp or a current limitation device, depending on the application.

In addition, because of its high insulation rating of 500 volts, these through-hole resistors can be used in applications where they may be exposed to higher than normal voltages. For example, if a high voltage is expected, then a MFR-12FRF52-1K33 can be used as a voltage drop resistor in order to reduce the voltage to a safe level.

The resistance of a through-hole resistor is also affected by the temperature of the environment that it is in. As the temperature increases, the resistance decreases, and as the temperature decreases, the resistance increases. This means that if the temperature in the environment is higher than normal, then it may be necessary to use a different type of resistor that is designed to maintain its resistance at higher temperatures. Generally, this type of resistor is referred to as an elevated temperature resistor, and is often used in industrial, automotive, and aerospace applications.

Overall, the MFR-12FRF52-1K33 is ideal for any application requiring a fixed-value resistor in a through-hole configuration. Its rugged construction and wide variety of resistance values make it an ideal choice for a range of industrial, automotive, and aerospace applications.

The specific data is subject to PDF, and the above content is for reference