MFR-12FRF52-1K5

Series:	MFR
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1.5 kOhms
Tolerance:	±1%
Power (Watts):	0.167W, 1/6W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.075" Dia x 0.134" L (1.90mm x 3.40mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: MFR-12FRF52-1K5

Through hole resistors are passive components that are made of a ceramic and fired with a metal system filament wrapped around them. They are found in many electronic circuits and serve to limit the flow of current of a circuit. The MFR-12FRF52-1K5 is an example of such a resistor.The MFR-12FRF52-1K5 is a through-hole resistor that is used to provide a resistance of 1K5 (1,500 ohms). It is a solid-body resistor with two external mounting tabs on either side of the body. The resistance value is given by its colour coded four-band system and it has a power rating of 1/2 watt. Its body is roughly 10mm in length and 4mm in width.The MFR-12FRF52-1K5 is typically found in applications such as voltage regulation, timing, over-voltage protection, DC/DC converters, large motor control, audio amplifiers, power supplies, and motor control systems. In these applications, the resistor is used to provide a level of resistance that can protect the components from damage due to overvoltage or current overloads.The working principle of the MFR-12FRF52-1K5 is based on Ohm’s law, which states that the current and voltage are proportional to each other in a conductor. The resistor acts like a resistance when a voltage is applied across it, which causes a proportionate amount of current to flow through it. The resistance of the resistor determines how much current will flow and how much voltage will be dropped across the resistor.The MFR-12FRF52-1K5 uses two external tabs to connect with a circuit. It is important to ensure that the proper polarity is observed when connecting the resistor with the circuit as doing so in the wrong direction can result in damage to components. Furthermore, it is also necessary to ensure that the correct wattage of the resistor is chosen for the application in order to avoid overheating. It is also important to ensure that the body of the resistor does not get damaged in any way as any physical damage may lead to abnormal resistive properties. Moreover, it is necessary to check the pins of the resistor for any signs of corrosion or rust in order to ensure proper operation.Overall, the MFR-12FRF52-1K5 is an excellent choice for through hole resistor applications. It is a potentiometer with a resistance of 1K5 and a power rating of 1/2 watt. It can be used in a variety of applications, including voltage regulation, timing, and over-voltage protection. It is important to ensure that proper polarity and power rating are used when connecting the resistor with the circuit, as well as check for any potential damage that may have occurred to the resistor itself.

The specific data is subject to PDF, and the above content is for reference