| Allicdata Part #: | MFR-12FRF52-1R15-ND |
| Manufacturer Part#: |
MFR-12FRF52-1R15 |
| Price: | $ 0.01 |
| Product Category: | Resistors |
| Manufacturer: | Yageo |
| Short Description: | RES MF 1/6W 1% AXIAL |
| More Detail: | 1.15 Ohms ±1% 0.167W, 1/6W Through Hole Resistor A... |
| DataSheet: |  MFR-12FRF52-1R15 Datasheet/PDF |
| Quantity: | 1000 |
| 5000 +: | $ 0.00681 |
| Series: | MFR |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 1.15 Ohms |
| Tolerance: | ±1% |
| Power (Watts): | 0.167W, 1/6W |
| Composition: | Metal Film |
| Features: | -- |
| Temperature Coefficient: | ±100ppm/°C |
| Operating Temperature: | -55°C ~ 155°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.075" Dia x 0.134" L (1.90mm x 3.40mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors:
MFR-12FRF52-1R15 is a through hole resistor, a type of component used in the electronic industry. The component is designed for easy connectivity to a printed circuit board. It has two leads, one at each side, connected to a resistor body made of ceramic material. This resistor is the most common type used today, with main applications being in signal processing and computers.
Applications
These resistors are ideal for applications that use low-frequency signals as they have an accurate response over frequency ranges of up to 500kHz. They can be used in a wide range of electronic circuits, ranging from simple logic gates to complex signal processing circuits. For example, they can be used for filtering, signal routing, and voltage regulation. They are also commonly used as compensation resistors, feedback resistors, pull-up and pull-down resistors, and matching networks.
These resistors can also be used in many applications from audio equipment to automotive systems. They can be used in combination with transistors as a low-noise amplifier, or as a part of an op-amp concept. Their low-profile design allows them to be used in extremely tight places, making them even more versatile.
Working Principle
As the name suggests, these resistors work by providing a resistance to current flow. The resistance of the resistor is proportional to the amount of current that is flowing. The resistor is composed of two parts, the body and the leads. The body of the resistor acts as an insulator which prevents any current from flowing through it. This happens due to the fact that the resistor body is made of ceramic material, which has very high resistance to current flow.
When a voltage is applied across the leads of the resistor, an electric current will flow through the leads, while the body of the resistor remains unaffected. The amount of current that will flow through the leads depends on the resistance of the resistor. By adjusting the resistance of the resistor, it is possible to control the amount of current that is flowing through a certain circuit.
Conclusion
The MFR-12FRF52-1R15 through hole resistor is an ideal choice for a wide range of electronic circuits. It has two leads which allow for easy connectivity to a printed circuit board. The body is made of ceramic material which provides a high resistance to current flow, making it ideal for use with low-frequency signals. The low-profile design also makes it suitable for use in very tight spaces. It can be used for filtering, signal routing, voltage regulation, and much more.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...