MFR-25DRE52-205R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are the most common type of resistors to be found on the market. They are designed to be mounted on a circuit board, and must be soldered to the board in order to create a connection. Through-hole resistors are usually identified by a three- or four-digit number code, which indicates the specific electrical characteristics of the resistor. MFR-25DRE52-205R happens to be one type of through-hole resistor. It is an axial-lead, single-in-line package (SIP) resistor with a resistance value of 2.50 KΩ (25 ohm). In addition, it has a tolerable accuracy of ±5%, maximum power rating of 0.2 watts, and insulation resistance of 100MΩ.

MFR-25DRE52-205R is a commonly used resistor for a wide number of applications. It is commonly used in voltage dividers, current limiters, and decoupling circuits. It is also used to produce negative feedback in amplifiers, to provide a current path in timing circuits, and to dampen power supply oscillations. In addition, the resistor can be used to limit the peak current in an electric motor or in a hydraulic valve. As it is highly resistant to high temperatures, it is well suited for use in high-temperature applications, such as those found in automotive and aerospace systems.

The working principle of MFR-25DRE52-205R is to reduce or limit the flow of current by increasing the resistance to that current. The current flow through the resistor is inversely proportional to the resistance of the resistor. That is, when the resistance increases, the current decreases and vice versa. This type of resistor is made of a semiconductor material such as silicon or nickel, which increases in resistance with increasing temperature. This increase in resistance causes the flow of current to be limited, thus preventing damage to the components in the circuit.

MFR-25DRE52-205R is made of a high-quality ceramic material, which means that it is highly resistant to temperature. The resistor is designed to operate at temperatures up to 175°C, allowing for its use in both domestic and industrial applications. It is also designed with a low-residual inductance of 0.5 nH, allowing for its use in HF Circuits as well. Additionally, it has a wide operating voltage range of 10-400V, making it suitable for use in a wide variety of circuits.

In conclusion, MFR-25DRE52-205R is a commonly used through-hole resistor with a vast range of applications. Its versatile design allows for a wide range of operating voltages, and an extremely high temperature rating. Its low residual inductance makes it suitable for use in high-frequency circuits, and its resistance characteristics make it suitable for use in a wide variety of circuits. As such, this type of resistor is ideal for numerous applications, and is sure to be found in a wide variety of products.

The specific data is subject to PDF, and the above content is for reference