Allicdata Part #: | 205KXTR-ND |
Manufacturer Part#: |
MFR-25FRF52-205K |
Price: | $ 0.01 |
Product Category: | Resistors |
Manufacturer: | Yageo |
Short Description: | RES 205K OHM 1/4W 1% AXIAL |
More Detail: | 205 kOhms ±1% 0.25W, 1/4W Through Hole Resistor Ax... |
DataSheet: | MFR-25FRF52-205K Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.00467 |
Series: | MFR |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 205 kOhms |
Tolerance: | ±1% |
Power (Watts): | 0.25W, 1/4W |
Composition: | Metal Film |
Features: | -- |
Temperature Coefficient: | ±100ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.094" Dia x 0.248" L (2.40mm x 6.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are some of the most commonly used components in electrical engineering, and the MFR-25FRF52-205K is one of the most widely used of this kind. This resistor has a wide application field and its working principle is quite easy to understand.
The MFR-25FRF52-205K is a type of fixed-value through hole resistor with a metal oxide film substrate, which is a non-inductive and robust component capable of handling temperatures up to 300 °C (572 °F). It has a power rating of 2 Watts and tolerances that range from 1% to 5%, depending on the model.
The resistor utilizes a series of thin strips of a resistive metal oxide film printed onto a ceramic substrate in order to make electrical connections. The number of strips represents the resistance value, and the film\'s width and length determines the tolerance value. These strips are then encased in a thin layer of glass, which is then covered in a plastic insulation material, such as epoxy or polyester. The outer layer acts as a protective barrier against environmental elements such as moisture or dust, which can degrade the resistive properties of this component.
This resistor is capable of handling moderately high power loads and is ideal for use in circuit boards or power supplies. It can be used for a variety of applications, such as temperature measurement, signal attenuation, and amplifying circuits. This type of resistor is also capable of handling high frequencies, making it ideal for use in radio frequency amplifiers.
The working principle of this type of resistor is based on ohm\'s law, which states that the current through a conductor between two points is directly proportional to the voltage across the two points, and inversely proportional to the resistance between them. This means that when a voltage is applied across the two connections, a current will flow through the resistor proportional to the voltage and the resistance value. The higher the resistance value, the lower the current and vice versa. By controlling the resistance value, the current can be regulated to the required levels.
These through hole resistors are widely used in both industrial and commercial applications. They are used in power supplies, oscillators, amplifiers, audio equipment, medical devices, computers, and more. They are an essential component in any electronics device, and are often the smallest and least expensive components in a circuit. Their design is simple enough to be manufactured relatively cheaply, which is why they are so widely used in the industry.
The MFR-25FRF52-205K is a versatile and robust component that is capable of handling a wide range of temperature conditions and power levels. Its simplicity and efficient design make it perfect for use in a variety of electronic devices. Understanding its working principle and application field is essential for any engineer that is interested in utilizing it in their own designs.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...