MFR-25FRF52-931R

Series:	MFR
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	931 Ohms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, also known as axial lead resistors, are a popular type of resistor equipped with axial leads for mounting to a printed circuit board. The use of through-hole resistors provides improved performance and reliability, over those equipped with surface mount technology. The MFR-25FRF52-931R is an example of a through-hole resistor, which is used in various applications.The MFR-25FRF52-931R is a metal film resistor, constructed from a thin film of metal oxide. The resistor has an overall diameter of 4.3mm with a 0.5mm lead diameter and a maximum length of 19.8mm. It is designed to dissipate 25 W of power and can withstand temperatures of up to 500° C without damage.The MFR-25FRF52-931R is commonly used in a wide range of applications, such as audio, automotive, medical, broadcast, industrial and telecom. It is often used as an alternative to traditional alloys for applications where higher dissipation and stability is required. The MFR-25FRF52-931R can be used to regulate current in power supplies, as a voltage divider, as a current limiter, and other similar applications.The working principle of the MFR-25FRF52-931R is based on Ohm\'s law. This states that current through a conductor between two points is directly proportional to the potential difference across those points. The resistance of the resistor is determined by the material used in its construction. In this case, the resistor is made of a metal oxide film, which is designed to provide the required level of resistance, as well as providing high wattage dissipation and temperature stability.The MFR-25FRF52-931R might also be used to create a voltage divider – a type of circuit commonly used in electronics. A voltage divider takes an input voltage and splits it into two or more equal parts. This is accomplished with two resistors in series, which each have a resistance value that is equal to the total resistance value of the circuit. The MFR-25FRF52-931R is able to handle the high voltages and currents associated with these circuits, while also providing the necessary stability and efficiency.In short, the MFR-25FRF52-931R is a through-hole resistor, which is designed for applications requiring high power dissipation and temperature stability. This resistor is commonly used in applications such as audio, automotive, medical, broadcast, industrial and telecom. In addition, it is often used to regulate current in power supplies, as a voltage divider, as a current limiter, and other similar applications. The working principle of the MFR-25FRF52-931R is based on Ohm\'s law, and the resistor is made of metal oxide film, which is designed to provide the required level of resistance, as well as providing high wattage dissipation and temperature stability.

The specific data is subject to PDF, and the above content is for reference