MFR-25FTE52-61K9

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are some of the most common and important electronic components used in today’s modern societies. The MFR-25FTE52-61K9 resistor is a popular through hole resistor that is used in a wide variety of applications. This article will explain the application fields and working principle of the MFR-25FTE52-61K9 resistor.

The MFR-25FTE52-61K9 resistor is typically used in power supplies, amplifiers, and voltage regulators. It is a linear resistor, meaning that it maintains a constant current or voltage, regardless of the changing external conditions. This is due to its ability to convert current or voltage signals into electrical signals with a specific resistance value. The signal can then be converted back into the originating power or voltage signal at the other side of the resistor.

The MFR-25FTE52-61K9 resistor is designed for a wide range of applications. It is ideal for either direct current (DC) or alternating current (AC) applications. It can be used as a voltage dividing resistor in the voltage-divider circuit. This, in turn, allows the user to precisely calibrate a voltage level signal. Additionally, the MFR-25FTE52-61K9 resistor can also be used in control circuitry to control the speed, position, and direction of a motor. Furthermore, the MFR-25FTE52-61K9 resistor can also be used to reduce power dissipation in line and power supplies that must carry very high currents, thereby increasing system efficiency.

The MFR-25FTE52-61K9 resistor works on Ohm’s law, which states that the current is inversely proportional to the voltage. This means that, when the voltage is increased, the current through the resistor is decreased, and vice versa. The resistance is calculated by dividing the voltage by the current. Therefore, if the voltage and current values are both known, the resistance can easily be calculated.

The MFR-25FTE52-61K9 resistor also has two tolerance ratings: ±5% and ±10%. The resistance rating is determined by how much the actual measured resistance deviates from the ideal resistance value. This means that, if the MFR-25FTE52-61K9 has a tolerance rating of ±10%, a measured resistance of 1000 Ohms can actually be anywhere between 900 to 1100 Ohms. This tolerance rating ensures that the resistor is within a range of acceptable resistances.

In conclusion, the MFR-25FTE52-61K9 resistor is a popular through hole resistor that can be used in a variety of applications. It works on Ohm’s Law, with two tolerance ratings of ±5% and ±10%, and it can be used to precisely calibrate a voltage level signal, control the speed, position, and direction of a motor, or reduce power dissipation in line and power supplies. It is a highly efficient and versatile resistor, making it an invaluable component in many applications.

The specific data is subject to PDF, and the above content is for reference