MFR-25FTF52-270R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are devices that resist the flow of electricity due to their low resistance value. They are used to reduce the voltage and current in a circuit. MFR-25FTF52-270R is one of the popular through hole resistors available in the market. This resistor has a rated wattage of 2 watts, a maximum voltage of 750V, a resistance range from 250Ω to 5.1KΩ and a temperature coefficient of -2000 ppm.

The MFR-25FTF52-270R is designed to provide a simple and reliable electrical connection between two points. It is a fixed value, compact package with a 2 watt rated power, non-inductive type, wide temperature range and solderable leads on both ends. The leads are made of nickel plated copper wire and are covered with a robust insulating and protective coating. The resistor also has a long service life due to its ceramic core and sturdy resistance wire. The resistor does not create any interference or noise in the circuit due to its high precision and low impedance.

The MFR-25FTF52-270R is used in a variety of applications such as automotive, electronic and industrial controls. It is used in DC-DC converters, AC-DC converters, low voltage circuit protection, voltage stabilizers, motor circuits, and high precision motor control systems. For these applications, it is necessary to use sturdier and more reliable components such as the MFR-25FTF52-270R. It provides higher reliability, accuracy and longer life than standard resistors.

The MFR-25FTF52-270R is designed to operate under extreme conditions. It can withstand temperatures ranging from -55 to +150°C and humidity levels up to 95%. Its resistance value does not change significantly with changes in humidity, temperature, and aging conditions. The resistor has a high surge endurance rating of 5kV and is tested to withstand dangerous electrical shocks without any problems. It also has excellent moisture and chemical resistance.

The MFR-25FTF52-270R employs the principle of Ohm\'s law which states that the resistance of a conductor is proportional to its length and inversely proportional to its cross-sectional area. Essentially, the current passing through a resistor is directly proportional to the voltage across it. The resistance of the MFR-25FTF52-270R is determined by its physical characteristics and it is highly stable even if the voltage or current changes.

The MFR-25FTF52-270R is widely used for resistive applications and its working principle is based on the Ohm\'s law. It is designed to provide a significant resistance value to the flow of current through a circuit and to limit the voltage and current in the circuit. The resistor allows current to flow only when the voltage is within a predefined range. This feature makes it suitable for limiting the voltage or current in a circuit while protecting it from overloads and accidental contact with hazardous voltages.

The MFR-25FTF52-270R through hole resistor is a perfect choice for various applications due to its impressive features such as its high precision and long service life. It is a reliable and cost-effective way to reduce noise and interference in a circuit and to limit the voltage and current in the circuit.

The specific data is subject to PDF, and the above content is for reference