
Allicdata Part #: | MFR-25JR-52-680R-ND |
Manufacturer Part#: |
MFR-25JR-52-680R |
Price: | $ 0.01 |
Product Category: | Resistors |
Manufacturer: | Yageo |
Short Description: | RES MF 1/4W 5% AXIAL |
More Detail: | 680 Ohms ±5% 0.25W, 1/4W Through Hole Resistor Axi... |
DataSheet: | ![]() |
Quantity: | 1000 |
5000 +: | $ 0.00428 |
Series: | MFR |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 680 Ohms |
Tolerance: | ±5% |
Power (Watts): | 0.25W, 1/4W |
Composition: | Metal Film |
Features: | -- |
Temperature Coefficient: | -- |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.094" Dia x 0.248" L (2.40mm x 6.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors, also known as leaded resistors or axial resistors, refer to those resistors with two terminals located on the same line and symmetrical on both sides of the body. MFR-25JR-52-680R is one type of the through hole resistor. It has two pronged end that is inserted into the circuit board and secured in place with solder. It is typically used in fields like consumer electronics, medical devices, automotive electronics, and other areas that require high precision.
Application Field
MFR-25JR-52-680R is a relatively small appliance, but its tight tolerance values makes it suitable for high precision applications like medical equipment, industrial control systems, and aerospace systems. Thanks to the two-pronged design, which can be mounted in any orientation, MFR-25JR-52-680R also finds itself used in consumer electronics such as TVs, printers, microwaves, computers, and the like.
Working Principle
A MFR-25JR-52-680R is an electrical component that is designed to control the flow of electricity by providing electrical resistance against the flow of current. This resistance produces a voltage drop, meaning that the voltage at the resistor’s two terminals is different even though the same current passes through them. This voltage drop can be used to reduce or limit a current flowing through a circuit. By doing so, MFR-25JR-52-680R helps to prevent damage to sensitive electrical components.
The working of MFR-25JR-52-680R can be compared to that of a water tap with a pinhole. When the flow of water is restricted by the pinhole, the pressure will increase. Similarly, when the flow of electricity is restricted by the resistor, the voltage will increase. In other words, the resistor acts as a “regulator” that controls the amount of current passing through a circuit.
The resistance of a MFR-25JR-52-680R is determined by its design. It has two terminals and the length of the body between them. Generally, the longer the body, the higher the resistance. The resistance can also be adjusted by adding more or less material between the terminals. The tolerance of the resistor is also indicated by a percentage, usually between 0.05 and 5%. This means that the actual resistance of the resistor can vary within the given range.
In summary, MFR-25JR-52-680R is a type of through hole resistor that is used in high precision applications such as medical and aerospace equipment. It has two terminals that are connected by a body length which can be adjusted in order to adjust the resistance of the resistor. The resistor can also feature a pre-specified tolerance meaning that the actual resistance of the resistor can range between a given value.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...

RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...

RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...

RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...

RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...

RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...
