| Allicdata Part #: | MFR-50FRE52-10R7-ND |
| Manufacturer Part#: |
MFR-50FRE52-10R7 |
| Price: | $ 0.01 |
| Product Category: | Resistors |
| Manufacturer: | Yageo |
| Short Description: | RES MF 1/2W 1% AXIAL |
| More Detail: | 10.7 Ohms ±1% 0.5W, 1/2W Through Hole Resistor Axi... |
| DataSheet: |  MFR-50FRE52-10R7 Datasheet/PDF |
| Quantity: | 1000 |
| 5000 +: | $ 0.00734 |
| Series: | MFR |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 10.7 Ohms |
| Tolerance: | ±1% |
| Power (Watts): | 0.5W, 1/2W |
| Composition: | Metal Film |
| Features: | -- |
| Temperature Coefficient: | ±50ppm/°C |
| Operating Temperature: | -55°C ~ 155°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.130" Dia x 0.354" L (3.30mm x 9.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors, also commonly known as axial lead resistors, are the most common form of resistors used in all types of electronic circuit designs. They are available in a wide range of sizes, shapes, and resistances for a variety of applications. The resistors can be used as seen in the figure 1 below.
The MFR-50FRE52-10R7 is a through hole resistor that is used in many applications, including regulation of current or voltage in a circuit. Due to its small size and low price, it can be used for a variety of applications. It has a resistance range of 10 Ω and is designed with a 2-terminal connection that allows for higher and more precise tolerances compared to other types of resistors. It is manufactured with a resistive oxide layer that gives it excellent electrical and thermal stability.
In terms of its working principle, the MFR-50FRE52-10R7 resistor works by introducing a resistance into the electrical circuit. This resistance reduces the amount of current through the circuit. The resistance value is determined by the size of the oxide layer on the resistor. A larger oxide layer results in greater resistance. When voltage is applied to the resistor, it produces heat as a byproduct, which can be both beneficial or detrimental depending on the application.
The MFR-50FRE52-10R7 resistor is suitable for a variety of applications, including power circuits, consumer electronics, automotive, and lighting applications. It is also used in radio frequency circuits to adjust the signal level. In addition, it is used as a voltage divider to regulate output voltages, and can also be used in temperature sensing circuits to measure temperature.
The MFR-50FRE52-10R7 resistor is ideal for use in high current applications due to its low thermal resistance and excellent stability. It is designed to be robust and reliable, making it suitable for use in applications that require a long life span.
Overall, the MFR-50FRE52-10R7 resistor is an excellent through hole resistor that is suitable for a wide range of applications and can offer you reliability and precise control of current and voltage. It is low cost, sturdy and highly stable, making it an ideal choice for a variety of electronic circuit designs.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...