MFR-50FTE52-19K1

Series:	MFR
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	19.1 kOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors, also known as wire-wound or axial lead resistors, are used in various power and industrial applications. These resistors offer high-precision, high-reliability performance and are commonly used for testing or troubleshooting electronic systems because of their high power dissipation, low self-inductance, and low capacitor discharge rate. The MFR-50FTE52-19K1 series through hole resistors are designed to suit the needs of the industrial market where precision and reliability are required.The MFR-50FTE52-19K1 through hole resistors are designed with an outer copper-plated sleeve (matching the diameter of the resistor), a thin-film resistor element, and a layer of dielectric coating on the outside, which helps to protect the resistor against moisture. The thin-film resistor element is a low-temperature co-fired ceramic (LTCC) substrate with a thick gold film that is initially sputtered onto the substrate. The gold film is then heated through electrical conduction, which causes it to expand and form a flat-contact surface for higher efficiency.The MFR-50FTE52-19K1 through hole resistors can handle up to 5 Watts of power and offer a wide resistance range of 0.1 ohms to 1 MOhms. The resistance value of the resistor can be easily adjusted by removing or adding wires and adjusting the contact pressure. This is done by tightening the screw on the contact hold on the end of the resistor. These through hole resistors also feature a high-temperature rating of 155°C, making them suitable for use in harsh environments.The working principle of the MFR-50FTE52-19K1 through hole resistor is based on the conductivity of a material. When an electrical current is passed through a material, the material resists the current. This resistance is known as Ohm\'s law, and it is measured in ohms per meter of the material. The MFR-50FTE52-19K1 through hole resistors are designed with a high resistance value. This means that, when a given current is passed through the resistor, the current will be reduced, resulting in a lower output voltage than the input voltage.The MFR-50FTE52-19K1 through hole resistors are most commonly used for power applications such as audio amplifiers, motor control, and power supply filters. They are also used in automotive applications, such as fuel injectors, HVAC systems, and airbag safety systems. These resistors are also used in many industrial applications, such as medical devices and instrumentation.In conclusion, the MFR-50FTE52-19K1 through hole resistor is a high-precision, high-reliability component that is suitable for a range of power and industrial applications. The resistor is capable of handling up to 5 Watts of power and offers a wide resistance range of 0.1 ohms to 1 MOhms. The resistance value of the resistor can be easily adjusted by removing or adding wires. This makes the resistor suitable for use in harsh environments, as it features a high-temperature rating of 155°C. Additionally, the MFR-50FTE52-19K1 works on the principle of resistance, which reduces current passing through the resistor.

The specific data is subject to PDF, and the above content is for reference