MFR-50FTE52-44K2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are electrical components used for dropping and dissipating electric current in electrical circuits. The type of resistor under discussion is the MFR-50FTE52-44K2, a resistor intended for use in high power applications such as power regulators, and operation in high temperatures. A closer consideration of its attribute reveals some interesting information about its design.

The MFR-50FTE52-44K2 resistor is a large component, measuring at 50mm in length and with a 12mm diameter. The chassis material of this resistor is composed of nickel-plated steel, making it capable of withstanding not only higher temperatures, but impacts and vibrations too. The resistor itself consists of 50 layers of glass-fiber-encased co-fired ceramic, with a resistance of 44.2K2 ohms.

The application field of the MFR-50FTE52-44K2 resistor is geared mostly towards use in high power density or power supplies. The large area of component and high temperature capabilities of the device make it suitable for these needs. Additionally, the design of the device with its steel chassis and layers of ceramic makes it ideal for high current and dissipating heavy loads.

The working principle of the MFR-50FTE52-44K2 resistor is the same as other resistors. That is, when an electrical current passes through the resistor, a voltage drop occurs due to the inherent resistance in the ceramic, which is limited by the number and width of the layers. The amount of voltage drop depends on the properties of the specific resistor and the power requirements of the circuit. As the voltage passes through the resistor, it is reduced and some of the energy is dissipated as heat, thus serving to maintain the anticipated voltage across the circuit’s load.

The MFR-50FTE52-44K2 resistors are highly acclaimed because of their excellent thermal performance and resistance to mechanical vibrations, even in applications operating at high temperatures. These factors make them ideal for use in power regulator circuits and other high power applications.

Overall, the MFR-50FTE52-44K2 is a highly efficient resistor designed for use in higher-power, high-temperature applications. Its steel chassis and layers of ceramic provide superior mechanical protection, thermal performance, and resistance to vibrations. Its application field is geared towards use in power regulator circuits and other high current/power density uses, making it ideal for these applications.

The specific data is subject to PDF, and the above content is for reference