MFR100FRF52-2K37

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, like MFR100FRF52-2K37, are a type of resistor used in a wide variety of electrical and electronic circuits. The MFR100FRF52-2K37 is usually a radial leaded design, meaning that the two pins that deliver power to the component are connected to two long leads that extend from the resistor, allowing the resistor to be attached to a board without the need for any additional hardware. This type of resistor is generally used in medium to high power applications, such as power supplies, audio amplifiers, and large motor drivers, but can also be used in lower power applications such as control circuits.

The MFR100FRF52-2K37 Through Hole Resistor generally has a power rating of 100 watts and can withstand a maximum voltage of 375 V. When selecting a MFR100FRF52-2K37 Through Hole Resistor, the user must be aware of the power rating and the maximum voltage that it is rated for, as using a resistor with a lower power rating may cause damage to components or equipment. The power rating of a resistor is typically stated in watts, and the maximum voltage rating of a resistor is typically stated in volts.

The MFR100FRF52-2K37 Through Hole Resistor has a small size and is available in various shapes and sizes, making it ideal for applications where the space available is limited. For example, a small resistor may be used in a small audio amplifier, while a large resistor may be used in a large power supply. Additionally, the MFR100FRF52-2K37 is designed to be resistant to temperature changes, vibration, and the effects of humidity, making it an excellent resistor for applications where these conditions may present a problem.

The working principle of the MFR100FRF52-2K37 Through Hole Resistor is based on Ohm’s Law, which states that the current flowing through a resistor is directly proportional to the voltage applied to the resistor. This means that when the voltage is increased, the current flowing through the resistor also increases. This increases the power dissipation of the resistor and can cause the resistor to overheat if the maximum power rating for the resistor is exceeded.

The MFR100FRF52-2K37 Through Hole Resistor also features a safety margin, which limits the maximum allowed current flow through the resistor. This safety margin is usually set to approximately 25 percent above the rated maximum current for the resistor. The maximum current allowed by the resistor is kept within this range to protect the resistor from damage due to excessive current flow.

The MFR100FRF52-2K37 Through Hole Resistor is also designed with an enclosure to help protect it from environmental elements and also helps to reduce EMI or electromagnetic interference. By using an enclosure, the resistor is protected from dust, dirt, and other contaminants that could potentially cause damage or interference to the component. An enclosure is also useful for limiting the amount of noise generated by the resistor, which can be problematic for sensitive circuits.

The MFR100FRF52-2K37 Through Hole Resistor is widely used in a variety of applications, including power supplies, audio amplifiers, and motor drivers. Its small size, rugged design, and high power rating make it an ideal solution for a variety of applications. Furthermore, its low cost makes it an economical choice for many applications. As such, the MFR100FRF52-2K37 Through Hole Resistor is a commonly used component in many electronics designs and should be considered when selecting a resistor for an application.

The specific data is subject to PDF, and the above content is for reference