MFR100FRF73-191K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are a type of resistor, which is used to reduce or regulate current flow, or provide a voltage division in electronic circuits. The MFR100FRF73-191K is one such type of through hole resistor, and it is used for a variety of applications in industrial automation, telecom and audio/visual equipment, medical and healthcare equipment, automotive electronic systems, energy management and control systems, test and measurement equipment, and consumer electronics.

The MFR100FRF73-191K is an axial-leaded, standard-tolerance through-hole resistor. It is constructed with a non-conductive ceramic core and a lead-free solderable terminations. It has a power dissipation of 0.2 watts at 25°C, and its temperature coefficient is – 20ppm/°C. It has a temperature range of – 55°C to +125°C, and a maximum current rating of 0.125A. The MFR100FRF73-191K also features an exceptionally high thermal response rate and can provide more than a 10% current reduction when operating at 134°C.

The working principle of the MFR100FRF73-191K is based on Ohm’s law. This law states that the current flowing through a resistor is proportional to the voltage applied across it. The resistor creates a resistance to the current flow, which is measured in ohms. The MFR100FRF73-191K has a resistance of 91kΩ, which is high enough to effectively limit the current flowing in the circuit.

In circuits that require low voltage drop, such as those powering LED displays, the MFR100FRF73-191K can be used as a voltage divider. This means that it can be used to divide up a voltage between two or more points in the circuit. The voltage will be proportional to the resistance of the resistor, so the voltage drop between the two points will be determined by the resistance of the resistor.

The MFR100FRF73-191K is also used as an over-current protective device. By placing it in series with a device, it can be used to limit the current that flows through the device. This can be helpful for protecting sensitive components, such as transistors, which can be damaged if too much current flows through them.

The MFR100FRF73-191K is a reliable and effective through hole resistor, which can be used for a variety of applications. Its high power dissipation, low temperature coefficient, and high thermal response rate make it an ideal choice for many electronic applications.

The specific data is subject to PDF, and the above content is for reference