MFR100FTE52-34K8

MFR100FTE52-34K8 is a type of through hole resistor which is widely used for different applications. Through hole resistors are resistors that are designed to mount in a circuit printed board alongside other electronic components. These have a cylindrical shape and have leads that come out either vertical from the resistor body or extend out thru the bottom of the resistor. Through hole resistors are usually single in-line package (SIP) and dual in-line package (DIP) type.The MFR100FTE52-34K8 through hole resistor has an octal base which stands for the number 8 in latin. This octal base provides a large amount of surface area for the soldering process to ensure a strong long lasting bond between the component and circuit board. It is also designed with a high power rating of up to 2 Watts and can withstand temperatures up to 175 deg C. The MFR 100FTE52-34K8 through hole resistor also offers a range of resistance values from 33kOhm - 34kOhm. In terms of application fields, the MFR100FTE52-34K8 through hole resistor is most commonly used for regulating current in exposed circuit boards, such as consumer electronics and automotive applications. It is also often used for precision current regulation where higher temperatures and higher power ratings are required.The working principle of the MFR100FTE52-34K8 through hole resistor is based on the basic concept of Ohm\'s Law. This law states that the current and voltage applied to the resistor must be inversely proportional. When current passes through the resistor, this creates a voltage drop and resistance in the circuit. This resistance is caused by the resistor materials present in the resistor that limit the flow of current. It is this same effect that is utilised when using the MFR100FTE52-34K8 through hole resistor for current regulation purposes.In conclusion, the MFR100FTE52-34K8 through hole resistor has a wide range of application fields and is an effective current regulator due to its high power rating and wide resistance value range. The working principle behind the resistor is based on Ohm\'s Law and the resistance materials present in the resistor. It is designed with an octal base which has a large surface area for a strong soldering bond and has a maximum temperature rating of up to 175 deg C.