MFR1WSDRD52-1M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are the most common form of variable resistors and are familiar to many hobbyists and DIYers. The MFR1WSDRD52-1M is a resistive element that, when applied to the board, operates at a steady current or voltage. When the current or voltage varies (occurring from outside impacts like electrical noise, surges or voltage drops), the resistor will vary its resistance to compensate and maintain consistent level output.

Through-hole resistors consists of a resistive element mounted onto a board. The resistive element is also known as a lead frame and is formed by shaping a sheet of metal into a flat band with two separate contact points. Their connection points are normally located at the bottom and top of the lead frame.When current is routed through the lead frame, electrical resistance is created between its points. This generates a voltage drop between the ground and the voltage that’s received at the board.

MFR1WSDRD52-1M resistors feature a 1/2 watt power rating. They are rated for 50 Ohms resistance values. The leads are connected to the appropriate points on the board, and the resistor maintains the same value as long as the current through it is kept constant. When the current or voltage increases, the resistance value of the resistor will increase, reducing the flow of current.

The MFR1WSDRD52-1M have a wide range of application fields. They are used in power supplies, amplifiers, audio circuits, and many consumer electronic products includingMP3 players, cellular phones and laptop computers.These resistors can also be used as current-limiting resistors to limit the amount of current flowing through components on a circuit board. When there is a power surge, the resistor will restrict the current to a safe level, allowing components on the board to remain safe.

The MFR1WSDRD52-1M through-hole resistors are ideal for use in situations that require precise control of current and voltage levels. Thanks to their low cost and their relatively fixed resistance value, they are commonly used in many industrial applications.

The specific data is subject to PDF, and the above content is for reference