MFR1WSFBE52-26R1

Series:	MFR
Packaging:	Bulk
Part Status:	Active
Resistance:	26.1 Ohms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MFR1WSFBE52-26R1 Through Hole ResistorsThe MFR1WSFBE52-26R1 is a through hole resistor designed to provide resistance in electrical and electronic circuits. It is categorized as a through hole resistor because it features one fixed lead and a second movable lead. The fixed lead is connected to a metal base and the movable lead slides into and out of the same base. The resistor can then be adjusted to desired resistance depending on the amount of current the metal base allows to pass. The MFR1WSFBE52-26R1 through hole resistor is made from a material that is considered to be self-extinguishing, meaning that it is able to safely function without catching fire in case of an overload.Application Field One of the most common application fields of the MFR1WSFBE52-26R1 through hole resistor is in resistive voltage dividers. A voltage divider is a circuit composed of two or more resistors connected in series across an external voltage source and the output of the divider is taken from the center of the network. The MFR1WSFBE52-26R1 is ideal for use in voltage dividers because of its adjustable capabilities. It can be used to adjust the voltage along the arm of the resistor in order to produce a voltage output of a desired magnitude. The resistor can also be used in series and parallel DC circuits to control current and voltage respectively.The MFR1WSFBE52-26R1 through hole resistor can also be used in AC circuits. In AC circuits, the resistor must be able to withstand larger current levels as its impedance is a function of the current. An AC circuit using MFR1WSFBE52-26R1 allows for current to be adjusted when needed, as opposed to a fixed resistor. This resistor can also be used in audio applications to reduce the transfer of power between two audio circuits. Lastly, it can be used in power supplies to control the current flow and ensure that a source of power is not overloaded or burned out.Working Principle TheMFR1WSFBE52-26R1 through hole resistor works on the principle of Ohm’s Law which states that the voltage across the resistor is directly proportional to the current that flows through it. This means that if the current going through the resistor increases, the voltage across the resistor also increases. This law allows for the resistor to be adjusted in order to control the current or voltage in an electrical circuit.The resistors also features a heat dissipater, which is a metal sleeve that is designed to disperse and regulate the temperature of the resistor. This helps to prevent the resistor from getting too hot and preventing current from flowing through it. The resistor also has a surge absorber which helps protect it from short-term over-currents or over-voltages that may occur.In conclusion, the MFR1WSFBE52-26R1 through hole resistor is a versatile and adjustable resistor that can be used in a number of applications and electrical circuits. Its adjustable capabilities and heat dissipater make it an ideal choice for voltage dividers, AC circuits, audio applications and power supplies. The working principle of the resistor is based on Ohm’s Law and it also features a surge absorber to protect it from short-term over-currents or over-voltages.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description