MFR1WSFBE52-2K43 Resistors

Series:	MFR
Packaging:	Bulk
Part Status:	Active
Resistance:	2.43 kOhms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors – MFR1WSFBE52-2K43

Through hole resistors are components which are the most commonly used passive electronic components used in electronics today. They are virtually used everywhere in modern circuits, from simple connections to power supplies to complex analog systems. A through hole resistor is usually an isolation resistor and is usually used on the bottom side of a PCB (Printed Circuit Board) in order to limit current and distinguish circuits from each other.The MFR1WSFBE52-2K43 is a through hole resistor from the NTR series manufactured by Vishay, one of the world’s leading resistive component manufacturers. This resistor is designed to have higher than the normal industrial temperature range and can be used as a general-purpose resistor in a variety of applications. It has an operating temperature range of -55°C to +125°C, and can also withstand higher temperature peaks.The MFR1WSFBE52-2K43 is a two-pin through hole resistor with a mounting hole diameter of 2mm. The rated power dissipation of the resistor is 1/8 Watt, while its rated maximum voltage is 250V. The resistor is available in several resistance values ranging from 10Ohm to 10KOhm. In addition, the resistor has a low-temperature coefficient of resistance (TCR) that is ±100ppm/°C, making it highly stable in varying temperatures. It also has a very low noise and can operate in a wide variety of applications.The working principle of a through hole resistor is fairly simple. For a given resistance value, the resistor will resist a specific amount of the electric current going through it. This resistance value can be changed by either increasing or decreasing the resistance inside the resistor, which is referred to as the "resistance adjustment". As such, when the resistor\'s resistance is adjusted, the applied voltage must be reduced or increased accordingly in order to eliminate any excessive current that might endanger the circuit.The MFR1WSFBE52-2K43 is a high quality and reliable component that can be used as a general-purpose resistor in many applications. Its wide temperature range and low TCR ensure that the resistor is highly stable in varying temperatures. Its compact design and ability to resist a wide range of currents make it an ideal choice for a variety of applications in both industrial and domestic circuits. The MFR1WSFBE52-2K43 is a reliable and economical choice for an isolation resistor in any through-hole application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description