MFR1WSFBF52-0R3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through Hole Resistors (MFR1WSFBF52-0R3) are a type of resistors used in electronic designs. They are mounted in holes drilled into the printed circuit board (PCB) and are designed to provide electrical connectivity to other components that are soldered to the PCB. They are most commonly used as high voltage, low impedance resistors to limit the current flow in an electronic circuit.

Application Field

Through Hole Resistors (MFR1WSFBF52-0R3) are commonly used in all types of electronic devices and circuits. They can be used to add power, to limit current, to block or modify signals, to provide voltage division, and to create negative feedback loops in circuits. They are very popularly used in the automotive, power electronics, avionics, and telecommunications fields, because their versatility makes them suitable for a wide range of applications.

Working Principle

Through Hole Resistors (MFR1WSFBF52-0R3) work on the principle of Ohm\'s law, which states that the current through a resistor is proportional to the voltage across it. This means that when an electric current flows through the resistor, a voltage is developed across the resistor. The magnitude of this voltage is determined by the resistance of the resistor. This allows the resistor to be used to limit the current flow, to divide voltages, and to modify signals.

The resistors are typically constructed by depositing a resistive material onto an insulating substrate. This material can be either a thin-film or thick-film material, depending on the application. When the current flows through the resistor, heat is generated, and the resistor must be designed to dissipate this heat to prevent damage to other components. The resistors can also be physically connected to other components on the PCB in order to perform signal filtering and voltage division.

Advantages

Through Hole Resistors (MFR1WSFBF52-0R3) have several advantages when compared to surface mount technology (SMT) resistors. They have a much lower parasitic inductance than surface mount resistors, which makes them suitable for high-power applications and where high-frequency signal integrity is required. They also have higher thermal stability and are less likely to be affected by high temperatures. In addition, they are more convenient to work with, as they do not require special tools for installation. Finally, they generally have lower cost than surface mount resistors.

Disadvantages

One of the principal disadvantages of Through Hole Resistors (MFR1WSFBF52-0R3) is that they are less compact than surface mount resistors. This leads to a larger component count and can require a larger PCB. They are also more prone to mechanical damage as they are securely mounted on the PCB. Finally, they may require additional manufacturing steps such as drilling and plating, which adds cost to the production of the PCB.

Conclusion

Through Hole Resistors (MFR1WSFBF52-0R3) are versatile and commonly used components in all kinds of electronic circuits. They are mounted in holes drilled into the PCB and designed to provide electrical connectivity and to limit the current flow in the circuit. They work on the principle of Ohm\'s law, which states that the current through the resistor is proportional to the voltage across it. Through Hole Resistors offer several advantages including low parasitic inductance, thermal stability, and lower cost. However, they have the disadvantage of being less compact than surface mount resistors, and more prone to mechanical damage.

The specific data is subject to PDF, and the above content is for reference