MFR1WSFRE52-10K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are widely used in the electrical and electronic industry. The MFR1WSFRE52-10K is an example of a through hole resistor, and its application field and working principle are discussed below.

MFR1WSFRE52-10K through hole resistors are mainly used in single phase AC and DC power systems. It works by limiting the amount of current that can flow through the component. The resistor works by reducing the voltage and power on the components that are connected to the resistor to the level that can safely handle the load. It also helps to limit the amount of voltage that is needed to start or run the device.

The working principle of the MFR1WSFRE52-10K is based on the ohmic characteristic of the resistor. When a current passes through the resistor, a voltage drop is generated across the resistor. This voltage drop is a function of the resistance of the resistor and is defined by Ohm’s law. The current through the resistor is also determined by Ohm’s law and is a function of the voltage across the resistor and the resistance of the resistor.

The resistance value of the MFR1WSFRE52-10K is 10Kohm. It has a maximum power rating of 0.25 watt with a tolerance of 5%. It has a temperature coefficient of 200ppm/°C and an operating temperature range of -55°C to 105°C. It also has a maximum voltage rating of 20 VDC.

The MFR1WSFRE52-10K has a variety of applications in electronic circuits. It is used as a current-limiting resistor in clipper, protection, and voltage regulator circuits. It is also commonly used in bridge configurations, such as the Wheatstone bridge. In addition, it is widely used in LED circuits as a light emitting diode (LED) current limiting resistor.

In summary, the MFR1WSFRE52-10K is an important through hole resistor that can be used in various electronic circuits. It is characterized by its 10Kohm resistance, 0.25 watt power rating, and 5% tolerance. Its voltage rating of 20 VDC makes it suitable for use in many applications. Due to its wide range of applications, the MFR1WSFRE52-10K has become one of the most commonly used resistors in the electronic industry.

The specific data is subject to PDF, and the above content is for reference