MFR1WSFRF52-1M5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

MFR1WSFRF52-1M5 is a through hole resistor which is widely used in many types of electronic circuits applications such as communications and consumer electronics. The device has an outer diameter of 11.1 millimeters, and a height of 8.8 millimeters. It is usually used to buffer or protect complex electrical systems against short circuits.

Application fields

The MFR1WSFRF52-1M5 is mainly used in applications where high-current flow is needed. Common applications includes: circuit protection, power supply and filter inductors, battery protection, and DC power supplies. It is also used in the circuitry of many consumer electronics such as radios, televisions, and mobile phones.

Due to their high current capacity, the MFR1WSFRF52-1M5 is widely used in power supplies and charging circuits. It acts as a protective element for the power source, preventing component damage due to line pressure spikes. In addition, it can also be used in switching power supplies, where it acts as an amplifier and helps to maintain signal integrity.

The device is also used in car electronics. It can be used as a signal indicator, allowing a car’s engine to detect whether or not a particular component is functioning correctly. In modern car stereo systems, the device serves as an amplifier, ensuring that the signal from one component is amplified before being sent to the next. Finally, the MFR1WSFRF52-1M5 can also be used in communication systems, where it helps to reduce ringing and crosstalk.

Working Principle

The MFR1WSFRF52-1M5 is an impedance-type device, meaning that it works by creating an electrical potential difference between its two terminals. In this type of device, a resistance material is placed between the two terminals, which creates a resistive path between the two points. Thus, when a current is applied to one terminal, a potential difference is created across the resistor, causing current to flow through the resistive path.

When the current flow is increased, the potential difference across the resistor increases as well. The resistance value of the resistor does not change, however, as the resistive material remains the same. This creates a constant voltage or current drop across the resistor, which can be used to protect a circuit from an excessive amount of current.

The MFR1WSFRF52-1M5 is designed with a ceramic body and copper leads. The ceramic body offers good thermal management and protection, while the copper leads provide high current capacity and reliable electrical connection with the circuit. The device is designed for use in a variety of operating environments, and can be mounted to a variety of surfaces, including printed circuit boards.

The MFR1WSFRF52-1M5 can be used in a variety of electrical circuits which require protection or buffering. Due to its high current capacity, it is especially useful in high-current scenarios, such as those involving charging and power supplies. Its ability to maintain signal integrity also makes it an ideal choice for applications such as car audio systems.

The specific data is subject to PDF, and the above content is for reference